Opportunity

Saskatchewan Tenders #ITT700102126

Royal University Hospital multi-section roof replacement and related safety upgrades

Posted

November 19, 2026

Respond By

December 14, 2026

Identifier

ITT700102126

NAICS

238160, 238290

The Saskatchewan Health Authority is seeking a contractor to renew multiple roof areas at Royal University Hospital’s 1955 Building and complete associated safety and building-system work. - Government buyer: Saskatchewan Health Authority (SHA), Procurement. - Project consultant: RMIS Engineering Ltd. - Scope: Replace roof systems across Sections A1, A2, B, C1, F1, F2, G1, G2 and G3; Section F3 is separately priced. The tender also refers to the A, F, C and E Wings. - Roofing and related work: Includes demolition and installation of insulation, cover board and 60-mil reinforced EPDM, plus drainage, waterproofing, flashings, metal wall panels and related components. Areas range from 225 to 4,875 sq. ft. by listed section; no overall unit quantity is specified. - Alternates and separate prices: A1 has an alternative 90-mil white EPDM membrane and an alternative to reuse existing gravel ballast with new protection mat. A1 also requires a separate price for six rolls of TPO walkway matting, each approximately 10 m by 1 m. F3 roof replacement is separately priced. - Named OEMs and reference products: Carlisle and Elevate EPDM; Elevate, Carlisle and Sika walkway matting; Thaler, Zurn, Watts and Wade roof drains; and Greenheck exhaust fan. Approved equivalents are permitted where specified. - Other equipment and safety items: Replace specified roof drains; remove, store, reinstall and test existing rooftop equipment; install fall-arrest anchors and a horizontal lifeline at F2, access ladders and platforms, and a cable tray at C1. New cable tray is at least 12 in. by 4 in. galvanized steel with a #2 AWG bare copper grounding conductor. - Notable requirements: Work takes place at an operating healthcare facility and requires infection-prevention planning, training, containment, monitoring and coordination with SHA. Fall-arrest anchor placement requires coordination with existing services and a ground-penetrating radar scan. Include a $20,000 lump-sum asbestos-abatement contingency for work if asbestos-containing material is encountered. - Warranties: The specifications require a 15-year manufacturer roof-system warranty and a two-year installer workmanship warranty. No specific product part numbers or total contract quantity are provided.

Description

The Saskatchewan Health Authority is seeking bids from qualified contractors to replace the inverted roof cover on the RUH A, F, C, and E Wings. The work is described in the contract documents, which include specifications and drawings. A mandatory site meeting is scheduled for December 4, 2026, at the Dube Centre in Saskatoon, and all bidders are required to attend. Bids are due December 14, 2026, at 2:00 p.m. Saskatchewan Time.

View original listing