# Saskatchewan Tenders #ITT700102126

Royal University Hospital multi-section roof replacement and related safety upgrades

**Posted:** November 19, 2026
**Respond By:** December 14, 2026
**Identifier:** ITT700102126
**NAICS:** 238160, 238290

The Saskatchewan Health Authority is seeking a contractor to renew multiple roof areas at Royal University Hospital’s 1955 Building and complete associated safety and building-system work.
- **Government buyer:** Saskatchewan Health Authority (SHA), Procurement.
- **Project consultant:** RMIS Engineering Ltd.
- **Scope:** Replace roof systems across Sections A1, A2, B, C1, F1, F2, G1, G2 and G3; Section F3 is separately priced. The tender also refers to the A, F, C and E Wings.
- **Roofing and related work:** Includes demolition and installation of insulation, cover board and 60-mil reinforced EPDM, plus drainage, waterproofing, flashings, metal wall panels and related components. Areas range from 225 to 4,875 sq. ft. by listed section; no overall unit quantity is specified.
- **Alternates and separate prices:** A1 has an alternative 90-mil white EPDM membrane and an alternative to reuse existing gravel ballast with new protection mat. A1 also requires a separate price for six rolls of TPO walkway matting, each approximately 10 m by 1 m. F3 roof replacement is separately priced.
- **Named OEMs and reference products:** **Carlisle** and **Elevate** EPDM; **Elevate**, **Carlisle** and **Sika** walkway matting; **Thaler**, **Zurn**, **Watts** and **Wade** roof drains; and **Greenheck** exhaust fan. Approved equivalents are permitted where specified.
- **Other equipment and safety items:** Replace specified roof drains; remove, store, reinstall and test existing rooftop equipment; install fall-arrest anchors and a horizontal lifeline at F2, access ladders and platforms, and a cable tray at C1. New cable tray is at least 12 in. by 4 in. galvanized steel with a #2 AWG bare copper grounding conductor.
- **Notable requirements:** Work takes place at an operating healthcare facility and requires infection-prevention planning, training, containment, monitoring and coordination with SHA. Fall-arrest anchor placement requires coordination with existing services and a ground-penetrating radar scan. Include a $20,000 lump-sum asbestos-abatement contingency for work if asbestos-containing material is encountered.
- **Warranties:** The specifications require a 15-year manufacturer roof-system warranty and a two-year installer workmanship warranty. No specific product part numbers or total contract quantity are provided.

### Description

The Saskatchewan Health Authority is seeking bids from qualified contractors to replace the inverted roof cover on the RUH A, F, C, and E Wings. The work is described in the contract documents, which include specifications and drawings. A mandatory site meeting is scheduled for December 4, 2026, at the Dube Centre in Saskatoon, and all bidders are required to attend. Bids are due December 14, 2026, at 2:00 p.m. Saskatchewan Time.

[View original listing](https://www.sasktenders.ca/Competitions/Print?id=f14b06bb-6816-4a7a-8bf8-633804b0d592)
