Opportunity
SAM #36C10X27Q0031
VA market research for nationwide low-temperature hydrogen peroxide sterilizers and related services
Buyer
VA CENTRAL OFFICE
Posted
November 19, 2026
Respond By
December 07, 2026
Identifier
36C10X27Q0031
NAICS
339113
The Department of Veterans Affairs is researching a nationwide supply of low-temperature hydrogen peroxide sterilizers for medical devices and 3D-printed items. - Government buyer: Department of Veterans Affairs (VA), Enterprise Procurement Office (EPO), in conjunction with the Veterans Health Administration (VHA) Non-Expendable Equipment National Program. - OEM: STERIS Corporation is the named manufacturer for the V-PRO MAX 2 system and listed related items. The VA may consider equivalent products. - Products: Three V-PRO MAX 2 sterilizer configurations, specialty cycles, monitoring and shelf accessories, Vaprox HC sterilant, and a freestanding cabinet package. Part numbers are listed below; quantities are not specified. - Services: Installation and deinstallation, pump service, maintenance and support plans, and service or customized training options. Part numbers and service terms are listed below. - Notable requirements under consideration: FDA 510(k) clearance; hydrogen peroxide sterilant; sterilization capability for reusable robotic medical devices and 3D-printed items; validation for at least one dual-channel scope; a non-lumen quick cycle; freestanding configuration; multiple-door configuration as an option; at least a one-year warranty; and support, maintenance, and training. - Market-research information requested: Technical literature demonstrating compliance, product and service pricing (including shipping and quantity discounts), country-of-origin information, and evidence of nationwide supply capability. - Procurement status: This is a sources-sought market research notice, not a request for offers or a commitment to award.
Description
1.0 DESCRIPTION THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation for bids, proposals, proposal abstracts, or quotations. The Department of Veterans Affairs (VA) Enterprise Procurement Office (EPO), formerly the Strategic Acquisition Center (SAC), is issuing this Sources Sought Notice as a means of conducting market research to identify qualified sources with the capability and resources to meet the Veterans Health Administration's (VHA) Non-Expendable Equipment National Program requirement for Sterilizer Unit Low Temperature H2O2, with 3D printed items sterilization capabilities. The EPO, in conjunction with VHA, is seeking qualified sources capable of supplying the Steris Corporation® V-Pro Max 2 Sterilizer or equivalent products that satisfy the Salient Characteristics on an agency-wide basis. VA is contemplating the award of a single Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contracts, to a supplier of this equipment. Respondents will be required to deliver complete Steris Corporation® V-Pro Max 2 Sterilizers to VA medical centers and facilities throughout the United States. The associated North American Industry Classification System (NAICS) code for this procurement is 339113 — Surgical Appliance and Supplies Manufacturing, and the associated size standard is 800 employees. The FAR Provision found at 52.204-7 requires that “The Offeror shall have an active Federal Government contracts registration in the System for Award Management (SAM) when submitting an offer or quotation.” You may access the SAM website at SAM.gov | Home. All respondents must be certified with the appropriate NAICS code on the SAM website. All Service-Disabled Veteran-Owned Small Business (SDVOSB) / Veteran-Owned Small Business (VOSB) respondents must be verified in the SBA database at https://www.sba.gov/veterans/#vetcert at the time of submission. Submissions for this Sources Sought Notice shall be submitted by email no later than December 9, 2026, at 12:00 p.m. Eastern Time to the Contract Specialist and Contracting Officer at the following email addresses: Joseph.Jeranek@va.gov Kimberly.LeMieux@va.gov Email responses shall include the following subject line: Response to Sources Sought Notice 36C10X27Q0031. This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to its current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. The Government may or may not issue a solicitation as a result of this notice. There is no solicitation available at this time.
2.0 SCOPE OF WORK The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Sterilizer Unit Low Temperature H2O2, with 3D printed items sterilization capabilities, as a candidate for a Veterans Affairs (VA)-wide (otherwise referred to as “national”) single Requirements contract award. The Low Temperature, Gaseous Plasma, Vaporized Hydrogen Peroxide (H2O2) Sterilizers are used for low-temperature sterilization of heat- and moisture-sensitive medical devices. Hydrogen peroxide is a known antimicrobial agent that oxidizes key cellular components within microorganisms, thereby destroying them. A low-temperature gaseous plasma sterilizer is an apparatus that uses vaporized hydrogen peroxide gas plasma to sterilize heat- and moisture-sensitive medical instruments and devices. The process involves injecting hydrogen peroxide vapor into a chamber, then applying an electrical field to create gas plasma. This plasma generates microbicidal free radicals that disrupt cellular components of microorganisms, killing them effectively. The process leaves behind harmless byproducts, water and oxygen, and is suitable for delicate equipment that cannot withstand high temperatures or humidity. Sterilization typically occurs at a temperature of less than 56°C, with process times of around 25 to 70 minutes depending upon cycle type. The following Contract Line Items (CLINs) are being considered: CLINManufacturerPart NumberDescription 0001STERIS CorporationVP50001101V-PRO MAX 2 STERILIZER 208-230V, 60HZ, REC SD EN 0002STERIS CorporationVP50002101V-PRO MAX 2 STERILIZER 208-230V, 60HZ, CAB SD EN 0003STERIS CorporationVP50003101V-PRO MAX 2 STERILIZER 208-230V, 60HZ, CAB DD EN 0004STERIS CorporationVP0081V-PRO MAX2 3X SPECIALTY CYCLES FACTORY INSTALLED 0005STERIS CorporationVP0082V-PRO MAX2 3X SPECIALTY CYCLES FIELD INSTALLED 0006STERIS CorporationVP0083INDEPENDENT MONITORING SYSTEM FOR V-PRO MAX 2 0007STERIS CorporationVP0084V-PRO WIDE SHELF 0008STERIS CorporationVP0085V-PRO MAX2 SPECIALTY CYCLE D FIELD INSTALLED 0009STERIS CorporationVP0086V-PRO MAX2 SPECIALTY CYCLE E FIELD INSTALLED 0010STERIS CorporationVP0087V-PRO MAX2 SPECIALTY CYCLE F FIELD INSTALLED 0011STERIS CorporationPB011VAPROX HC STERILANT (3 X 113 ML-PLASTIC BOTTLES IN FIBERBOARD BOX) RFID 0012STERIS CorporationPB012VAPROX HC STERILANT (4 X 29.6 ML-PLASTIC CUPS IN FIBERBOARD BOX) RFID 0013STERIS CorporationSE60098100001051ST YEAR DEEP-VACUUM PUMP SVC V-PRO MAX 2 (3 PM) 0014STERIS CorporationSE600962STANDARD INSTALL LARGE HYDROGEN PEROXIDE STERILIZERS 0015STERIS CorporationSE6009621STANDARD DEINSTALL LARGE HYDROGEN PEROXIDE STERILIZER 0016STERIS CorporationP146669300CABINET PACKAGE SD FREE STANDING 0017STERIS CorporationSE6009485STANDARD INSTALL SEISMIC LOW TEMPERATURE STERILIZERS 0018STERIS CorporationSE6009852000103TOTAL CARE CONNECT V-PRO MAX 2 (2 PM) 0019STERIS CorporationSE60098530001032 YEARS OF TOTAL CARE CONNECT V-PRO MAX 2 (2 PM) 0020STERIS CorporationSE60098100003LABOR CARE W/PM PARTS V-PRO MAX 2 0021STERIS CorporationSE600980002832 YEARS OF LABOR CARE W/PM PARTS V-PRO MAX 2 0022STERIS CorporationSE6009811000103LABOR CARE V-PRO MAX 2 0023STERIS CorporationSE60098110281032 YEARS OF LABOR CARE V-PRO MAX 2 0024STERIS CorporationSE6009800048103PREVENTIVE CARE V-PRO MAX 2 0025STERIS CorporationSE60098000281032 YEARS PREVENTIVE CARE V-PRO MAX 2 0026STERIS CorporationSE0000044SERVICE TRAINING PROGRAM FOR V-PRO LOW TEMPERATURE, MENTOR, OH 0027STERIS CorporationSE0000046CUSTOMIZED TRAINING - 1 DAY / UP TO 5 TRAINEES 0028STERIS CorporationSE0000047CUSTOMIZED TRAINING - 2 DAYS / UP TO 5 TRAINEES 0029STERIS CorporationSE0000048CUSTOMIZED TRAINING - 3 DAYS / UP TO 5 TRAINEES 0030STERIS CorporationSE61118CUSTOMIZED TRAINING - 4 DAYS / UP TO 5 TRAINEES 0031STERIS CorporationSE61119CUSTOMIZED TRAINING - 5 DAYS / UP TO 5 TRAINEES Respondents should identify a complete solution including associated accessories, as required for the system's full functionality. The following Salient Characteristics (SC) are being considered: CLINs 0001–0017 apply to the following SCs 1–8. CLINs 0018–0026 pertain to SC 9. CLINs 0027–0032 pertain to SC 10. SC #Salient Characteristics SC 1Must be a freestanding configuration. SC 2Must be capable of sterilizing reusable robotic medical devices/instruments. SC 3Must be certified for sterilizing 3D printed items. SC 4Must have FDA 510k clearance. SC 5Must use H2O2/hydrogen peroxide for sterilant base. SC 6Must have the option of multiple doors. SC 7Must be validated to handle at least one dual-channel scope. SC 8Must have a non-lumen quick cycle. SC 9Shall provide a minimum 1-year warranty. SC 11Must provide support and maintenance plans. SC 12Must provide training. For each product identified in the response (brand name and part number), the response must include descriptive literature demonstrating that the product meets or exceeds the SCs specified above. The Government's intent is to include all ancillary items necessary to ensure the equipment can function as designed by the OEM and as required. Respondents are encouraged to identify any additional STERIS accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated system. These items must be clearly identified by brand name and part number.
Responses to this Sources Sought Notice shall include the following: Full name and address of company. SAM Unique Entity Identifier (UEI). Business size and socioeconomic status, if applicable (e.g., SDVOSB, VOSB, WOSB, HUBZone, 8(a)). Manufacturer or distributor: If distributor, provide the full name, business size, and address of the manufacturer. If distributor, provide evidence that your firm is currently an authorized distributor for the manufacturer of the products proposed, e.g., an authorized distributor letter with current date certified by the OEM. Country of Origin designation for all products proposed. Describe the firm's ability to provide uninterrupted supply of products on a national scale. Technical literature clearly demonstrating that the proposed product(s) meet the identified minimum technical requirements, identifying the page number(s) where each requirement is met. Does respondent offer an annual service plan, Yes or No? If yes, describe what the plan covers. Identify whether the plan covers software updates, parts repair/replacement, or both. Provide literature or other documentation describing the service plan. Identify whether service is provided by the OEM or a subcontractor. Identify any additional STERIS product, accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated systems. Include the applicable brand name and part number. Item pricing information for products, inclusive of flat-rate shipping. Include any quantity discounts, noting at what order quantity the Government should expect tiered price reductions, if any. NOTE: In order for the Contracting Officer to determine whether a set-aside can be pursued, it is essential to provide pricing information. Without this information, the Contracting Officer will be unable to assess whether there is a reasonable expectation of receiving fair and reasonable pricing from socio-economic concerns. Does your firm anticipate any subcontracting opportunities for this requirement? If yes, identify the type and approximate scope of work that could be subcontracted. Identify any federal contract vehicles held by your firm through which your firm can provide this equipment. Are there any further standards or criteria VA should consider in a procurement action for this equipment? Are the Government's specifications unduly restrictive? If yes, identify the specific requirement(s) considered unduly restrictive and provide supporting rationale and recommended alternative language. Any additional information the Government should know prior to issuing a solicitation. Describe any minimum order quantities, geographic limitations, delivery constraints, lead times, or other limitations that could affect the firm's ability to support the requirement on a nationwide basis.
Additional Links: Learn more about EPO and its mission