Opportunity

SAM #80NSSC27949127Q

NASA seeks capability statements for two custom TS405 pressure vessels

Buyer

NASA Shared Services Center

Posted

November 17, 2026

Respond By

November 19, 2026

Identifier

80NSSC27949127Q

NAICS

332420

NASA is assessing whether to compete a proposed purchase of two custom pressure vessels for the TS405 propellant skid at White Sands Test Facility. - Procurement approach: NASA/NSSC identifies Prentex Alloy Fabricators, Inc. as the sole provider and is requesting capability statements to determine whether the requirement should be competed; quotes are not being considered. - Products: Two identical 200-gallon pressure vessels, with a minimum design pressure of 2,000 psig and a design temperature range of -20°F to +150°F. - Vessels must match the NASA-approved TS403 configuration (S/N E-250 and E-251), use 304/304L stainless steel, and be suitable for MMH and nitrogen tetroxide service. - Each vessel must be ASME Section VIII, Division 1 code stamped and National Board registered. - Included work: Fabrication drawings and code calculations for NASA review; material procurement; fabrication, inspections, nondestructive examination, hydrostatic testing, stamping and registration; documentation, shipment preparation, and delivery to WSTF. - Key requirement: NASA must approve fabrication drawings before fabrication begins. Monthly schedule and risk updates are required. - Schedule and location: Planned delivery is approximately 20–30 weeks after award, subject to confirmation of the production schedule. Performance and delivery are at NASA White Sands Test Facility; the initial notice also identifies NASA’s Stennis Space Center as the performance location. - Notice details: NAICS 332420. The notice references a statement of work and provides no fixed quantity or specifications in its main text; the attachment specifies two vessels.

Description

SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for TS-405 Vessel. NASA/NSSC intends to issue a sole source contract to PRENTEX ALLOY FABRICATORS, INC, 390 Clay RD, Sunnyvale, Texas 75182-9711 under the authority of FAR 12.102(a). It has been determined that PRENTEX ALLOY FABRICATORS, INC is the sole provider of TS-405 Vessel. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Stennis Space Center (SSC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 332420. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:00 p.m. Central Standard Time on 11/19/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp- Advocate-Listing.pdf . Primary Point of Contact: Tracy Bremer Procurement Specialist tracy.g.bremer@nasa.gov

View original listing