# SAM #80NSSC27949127Q

NASA seeks capability statements for two custom TS405 pressure vessels

**Buyer:** NASA Shared Services Center
**Posted:** November 17, 2026
**Respond By:** November 19, 2026
**Identifier:** 80NSSC27949127Q
**NAICS:** 332420

NASA is assessing whether to compete a proposed purchase of two custom pressure vessels for the TS405 propellant skid at White Sands Test Facility.
- **Procurement approach:** NASA/NSSC identifies Prentex Alloy Fabricators, Inc. as the sole provider and is requesting capability statements to determine whether the requirement should be competed; quotes are not being considered.
- **Products:** Two identical 200-gallon pressure vessels, with a minimum design pressure of 2,000 psig and a design temperature range of -20°F to +150°F.
  - Vessels must match the NASA-approved TS403 configuration (S/N E-250 and E-251), use 304/304L stainless steel, and be suitable for MMH and nitrogen tetroxide service.
  - Each vessel must be ASME Section VIII, Division 1 code stamped and National Board registered.
- **Included work:** Fabrication drawings and code calculations for NASA review; material procurement; fabrication, inspections, nondestructive examination, hydrostatic testing, stamping and registration; documentation, shipment preparation, and delivery to WSTF.
- **Key requirement:** NASA must approve fabrication drawings before fabrication begins. Monthly schedule and risk updates are required.
- **Schedule and location:** Planned delivery is approximately 20–30 weeks after award, subject to confirmation of the production schedule. Performance and delivery are at NASA White Sands Test Facility; the initial notice also identifies NASA’s Stennis Space Center as the performance location.
- **Notice details:** NAICS 332420. The notice references a statement of work and provides no fixed quantity or specifications in its main text; the attachment specifies two vessels.

### Description

<p>SPECIAL NOTICE:<br />
VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT.<br />
NASA/NSSC has a requirement for TS-405 Vessel.<br />
NASA/NSSC intends to issue a sole source contract to PRENTEX ALLOY FABRICATORS, INC, 390 Clay<br />
RD, Sunnyvale, Texas 75182-9711 under the authority of FAR 12.102(a). It has been determined that<br />
PRENTEX ALLOY FABRICATORS, INC is the sole provider of TS-405 Vessel.<br />
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Stennis Space<br />
Center (SSC).<br />
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures<br />
prescribed in FAR Part 12 for Commercial<br />
The NAICS Code for this procurement is 332420.<br />
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the<br />
identified point of contact not later than 4:00 p.m. Central Standard Time on 11/19/2026. Such<br />
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this<br />
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on<br />
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the<br />
government.<br />
Oral communications are not acceptable in response to this notice.<br />
NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by<br />
NASA&rsquo;s Technical End User Team. We are currently only requesting Capability Statements.<br />
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this<br />
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-<br />
Advocate-Listing.pdf .<br />
Primary Point of Contact:<br />
Tracy Bremer<br />
Procurement Specialist<br />
tracy.g.bremer@nasa.gov</p>

[View original listing](https://sam.gov/opp/cbea685f00544a10b18d2c3047cbe0fa/view)
