SAM #C27-003

X-ray Controller and Automated Equipment Upgrade for Air Force 76 CMXG

The Department of the Air Force is seeking an upgrade to the 76 CMXG X-ray system at Tinker Air Force Base. - Government buyer: Department of the Air Force, Air Force Materiel Command, Air Force Sustainment Center; the equipment is for 76 CMXG at Tinker Air Force Base. - OEMs and vendors named: Parker Motion Systems (motion-control software libraries) and Vecow (existing PC). - Requested equipment: Upgrade the X-ray booth controller and automated equipment as an approved equivalent to the X-Ray Apparatus Set identified by NSN MIL-PRF-32133/6635-01-394-5926. Includes servo motors, drives, operator interfaces, manual controls, and programmable motion-control software based on Parker Motion Systems libraries. No purchase quantity is specified. - Integration requirement: The upgraded motion program must run on the existing Vecow PC and interface with the current imaging software. - Associated services and deliverables: Onsite installation, testing, debugging, and acceptance support; at least four hours of operator and maintenance training; removal and disposal of existing equipment; and three complete sets of engineering manuals, including drawings, schematics, and troubleshooting guides.

Description

The 76 CMXG is requesting the utilization of funds for the procurement of Upgrade X­ray controller and Automated Equipment. In accordance with AIR FORCE T.O 33B-1-2 (Table 3, Master List of Suppo1t Equipment), the system must be an approved equivalent to the X-Ray Apparatus Set (Master/Procmement NSN: MIL-PRF-32133/6635-01-394-5926). The required system must strictly adhere to the following component specifications: 

SYSTEM SPECIFICATIONS (Upgrade X-ray booth X-ray controller and automated equipment) 

•    Hardware: Includes new servo motors, drives, operator control user interfaces, and manual controls hardware. •    Software: Features programmable motion control software based on Parker Motion Systems libraries. It includes an intuitive interface for custom motion programs, automatic inspection positioning for repeatable programs, and digital image capture/save capabilities. •    System Integration: The upgraded motion program will operate on the existing Vecow PC, interfacing directly with cmTent imaging software.

INSTALLATION, TRAINING AND DOCUMENTATION

•    Installation & Training: Installation and a minimum of 4 homs of Operator and Maintenance Training onsite. (Covers travel, labor, shipping, and necessaiy bracketing hai·dwai·e to mount/remove equipment in the CMXG TSG X-ray System, with up to two (2) days onsite for installation, testing, debugging, and system acceptance). •    Removal and Disposal of the existing equipment. •    Documentation: Deliver three (3) complete sets of engineering manuals, which include drawings, schematics, and troubleshooting guides.

View original listing