# SAM #C27-003

X-ray Controller and Automated Equipment Upgrade for Air Force 76 CMXG

**Buyer:** AFSC PZIMA
**Posted:** October 29, 2026
**Respond By:** November 05, 2026
**Identifier:** C27-003
**NAICS:** 334515, 334511, 334418, 811210

The Department of the Air Force is seeking an upgrade to the 76 CMXG X-ray system at Tinker Air Force Base.
- **Government buyer:** Department of the Air Force, Air Force Materiel Command, Air Force Sustainment Center; the equipment is for 76 CMXG at Tinker Air Force Base.
- **OEMs and vendors named:** **Parker Motion Systems** (motion-control software libraries) and **Vecow** (existing PC).
- **Requested equipment:** Upgrade the X-ray booth controller and automated equipment as an approved equivalent to the X-Ray Apparatus Set identified by NSN MIL-PRF-32133/6635-01-394-5926. Includes servo motors, drives, operator interfaces, manual controls, and programmable motion-control software based on Parker Motion Systems libraries. No purchase quantity is specified.
- **Integration requirement:** The upgraded motion program must run on the existing Vecow PC and interface with the current imaging software.
- **Associated services and deliverables:** Onsite installation, testing, debugging, and acceptance support; at least four hours of operator and maintenance training; removal and disposal of existing equipment; and three complete sets of engineering manuals, including drawings, schematics, and troubleshooting guides.

### Description

<p>The 76 CMXG is requesting the utilization of funds for the procurement of Upgrade X&shy;ray controller and Automated Equipment. In accordance with AIR FORCE T.O 33B-1-2 (Table 3, Master List of Suppo1t Equipment), the system must be an approved equivalent to the X-Ray Apparatus Set (Master/Procmement NSN: MIL-PRF-32133/6635-01-394-5926). The required system must strictly adhere to the following component specifications:&nbsp;</p>

<p><br />
SYSTEM SPECIFICATIONS (Upgrade X-ray booth X-ray controller and automated equipment)&nbsp;</p>

<p>&bull;&nbsp;&nbsp; <strong>&nbsp;Hardware</strong>: Includes new servo motors, drives, operator control user interfaces, and manual controls hardware.<br />
&bull;&nbsp;&nbsp; &nbsp;<strong>Software:</strong> Features programmable motion control software based on Parker Motion Systems libraries. It includes an intuitive interface for custom motion programs, automatic inspection positioning for repeatable programs, and digital image capture/save capabilities.<br />
&bull;&nbsp;&nbsp; &nbsp;<strong>System Integration</strong>: The upgraded motion program will operate on the existing Vecow PC, interfacing directly with cmTent imaging software.</p>

<p>INSTALLATION, TRAINING AND DOCUMENTATION</p>

<p>&bull;&nbsp;&nbsp; &nbsp;<strong>Installation &amp; Training: </strong>Installation and a minimum of 4 homs of Operator and Maintenance Training onsite. (Covers travel, labor, shipping, and necessaiy bracketing hai&middot;dwai&middot;e to mount/remove equipment in the CMXG TSG X-ray System, with up to two (2) days onsite for installation, testing, debugging, and system acceptance).<br />
&bull;&nbsp;&nbsp; &nbsp;Removal and Disposal of the existing equipment.<br />
&bull;&nbsp;&nbsp; &nbsp;<strong>Documentation:</strong> Deliver three (3) complete sets of engineering manuals, which include drawings, schematics, and troubleshooting guides.</p>

[View original listing](https://sam.gov/opp/a465d208acaf4bd6bf8b14ac8dc956f4/view)