Alabama Procurement Portal #SRC0000037069

Inspection services for Cincinnati and Precision press equipment

Alabama is seeking inspection services for three pieces of industrial press equipment identified by the Cincinnati and Precision names. - Buyer: Alabama state agency associated with HNTP-HNTG, Division of Procurement; the specific agency is not identified. - Equipment and scope: Inspect one Cincinnati MC Press, Model 690CBX6, Serial No. 46967, Property ID 12-050244; one 60-ton Precision OBI; and one Cincinnati Press Brake. Provide inspection reports after completing the work. - OEMs named: Cincinnati and Precision. No service contractor or reseller is identified. - Estimated cost components: 8 labor hours at $125/hour; 991 travel miles at $0.73/mile; 15.5 travel hours at $100/hour; $3 in tolls; three lodging nights at $210/night; and $40 budgeted for meals. These listed amounts total approximately $3,946.43; additional lodging, parts, and labor may be needed if repairs are required. - Notable requirements: The contractor must perform the work without subcontracting, pass a background check, and provide inspection reports. Billing is monthly in arrears.

Description

The solicitation seeks inspection of a Cincinnati MC Press, Model 690CBX6, Serial #46967, Property ID 12-050244, as well as a 60-ton Precision OBI and Cincinnati Press Brake. The contractor must provide inspection reports upon completion, perform the work without subcontracting, and pass a background check. The source estimates 8 hours of labor at $125 per hour and specifies travel, toll, lodging, and meal costs; additional parts, labor, or hotel stays may be needed depending on required repairs. Billing is monthly in arrears, and the response deadline is October 16, 2026, at 2:30 PM CST.

View original listing