# Alabama Procurement Portal #SRC0000037069

Inspection services for Cincinnati and Precision press equipment

**Posted:** October 13, 2026
**Respond By:** October 16, 2026
**Identifier:** SRC0000037069
**NAICS:** 811310

Alabama is seeking inspection services for three pieces of industrial press equipment identified by the **Cincinnati** and **Precision** names.
- **Buyer:** Alabama state agency associated with HNTP-HNTG, Division of Procurement; the specific agency is not identified.
- **Equipment and scope:** Inspect one Cincinnati MC Press, Model 690CBX6, Serial No. 46967, Property ID 12-050244; one 60-ton Precision OBI; and one Cincinnati Press Brake. Provide inspection reports after completing the work.
- **OEMs named:** **Cincinnati** and **Precision**. No service contractor or reseller is identified.
- **Estimated cost components:** 8 labor hours at $125/hour; 991 travel miles at $0.73/mile; 15.5 travel hours at $100/hour; $3 in tolls; three lodging nights at $210/night; and $40 budgeted for meals. These listed amounts total approximately $3,946.43; additional lodging, parts, and labor may be needed if repairs are required.
- **Notable requirements:** The contractor must perform the work without subcontracting, pass a background check, and provide inspection reports. Billing is monthly in arrears.

### Description

The solicitation seeks inspection of a Cincinnati MC Press, Model 690CBX6, Serial #46967, Property ID 12-050244, as well as a 60-ton Precision OBI and Cincinnati Press Brake. The contractor must provide inspection reports upon completion, perform the work without subcontracting, and pass a background check. The source estimates 8 hours of labor at $125 per hour and specifies travel, toll, lodging, and meal costs; additional parts, labor, or hotel stays may be needed depending on required repairs. Billing is monthly in arrears, and the response deadline is October 16, 2026, at 2:30 PM CST.

[View original listing](https://alabamabuys.gov/page.aspx/en/bpm/process_manage_extranet/45258)