SAM #W911S226U4559

Custom Splash Shield Partition Room for McAlester Army Ammunition Plant

This procurement opportunity is issued by the Mission Installation Contracting Command (MICC) at Fort Drum for the Department of the Army, targeting the acquisition of a custom splash shield partition room for the McAlester Army Ammunition Plant in Oklahoma. - Government Buyer: - Department of the Army - Mission Installation Contracting Command (MICC), Fort Drum - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Products/Services Requested: - Splash shield partition room (custom fabricated) - Metal frame tubing: 5 ft x 2 in x 4 in (top/bottom), 16 ft x 2 in x 4 in (curtain areas) - Angle-iron frame with gray powder coating - Two doors with keyed cylinder locks - Panels: 1/4-inch-thick clear polycarbonate - Partition height: 8 ft 5 in, with minimum 4-inch open clearance at bottom (except doors) - Multiple panels and doors with specified dimensions - Industrial sliding curtains and strip door are government-furnished (not part of this purchase) - Unique/Notable Requirements: - Custom fabrication to specified dimensions and materials - Delivery only; installation is not required - All panels except doors must have a minimum 4-inch open clearance at the bottom - Doors must include keyed cylinder locks - Powder-coated finish for durability - No installation services included; purchase and delivery only - No part numbers or OEMs are specified; open to qualified manufacturers meeting the requirements.

Description

567 Tar Shield Salient Characteristics for Matrix: The contractor shall furnish and deliver one (1) splash shield partition room meeting the following minimum salient characteristics: Metal Frame Tubing: 5 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom. Metal Frame Tubing for Curtain Areas:16 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom.16 ft -0 inches W 2 inches x 4 inches One tube for top and one tube for bottom. No Ceiling with the partition room. Angle-iron frame, finished with gray powder coating. Two doors each to be equipped with a keyed cylinder lock on door. FOR FULL PANELS Overall partition height of 8 feet, 5 inches with minimum 4-inch open clearance on the bottom of all panels except the doors. Each Panel shall be in width of no more or no less than: 1/4-inch-thick clear polycarbonate.2 ft 0 inches Panel5 ft 0 inches Top and Bottom Tube9 ft 0 inches Panel 10 ft 0 inches Panel3 ft 7 inches Door1 ft 9 inches Panel7 ft 6 inches Panel 7 ft 0 inches Panel8 ft 0 inches Panel 10 ft 0 inches Panel 10 ft 0 inches Panel6 ft 0 inches Panel5 ft 4 inches Panel 10 ft 0 inches Panel8 ft 11 inches Panel3 ft 7 inches Door Material shall be delivered to the Government-designated location. Government-furnished / not included: Industrial sliding curtains for the two Section #6 openings. Strip door for the Section #9 opening. Purchase only, no install requested. The cited vendor quote identifies the partition as a single room with polycarbonate panels and a door, with the above framing, finish, height, and lock requirements. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U4559Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing