# SAM #W911S226U4559

Procurement of Custom Splash Shield Partition Room for McAlester Army Ammunition Plant

**Buyer:** MICC-Ft Drum
**Posted:** September 28, 2026
**Respond By:** October 06, 2026
**Identifier:** W911S226U4559
**NAICS:** 337215, 339999

The Mission Installation Contracting Command (MICC) at Fort Drum, under the Department of the Army, is seeking offers for the supply and delivery of a splash shield partition room for the McAlester Army Ammunition Plant in Oklahoma.
- Government Buyer:
  - Department of the Army
  - Mission Installation Contracting Command (MICC), Fort Drum
  - End user: McAlester Army Ammunition Plant
- OEMs and Vendors:
  - No specific OEMs or vendors are named in the solicitation
- Products/Services Requested:
  - Splash shield partition room (custom fabricated)
    - Metal frame tubing (top/bottom: 5 ft x 2 in x 4 in; curtain areas: 16 ft x 2 in x 4 in)
    - Angle-iron frame with gray powder coating
    - Two doors with keyed cylinder locks
    - Panels: 1/4-inch-thick clear polycarbonate
    - Partition height: 8 ft 5 in
    - Minimum 4-inch open clearance at bottom of all panels except doors
    - Multiple panels and doors with specified dimensions
  - Quantity: 1 complete partition room
- Unique or Notable Requirements:
  - Industrial sliding curtains and a strip door for certain openings are government-furnished and not part of this purchase
  - Requirement is for purchase and delivery only; installation is not included
  - Custom fabrication to specified dimensions and materials

### Description

567 Tar Shield Salient Characteristics for Matrix: The contractor shall furnish and deliver one (1) splash shield partition room meeting the following minimum salient characteristics: Metal Frame Tubing: 5 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom. Metal Frame Tubing for Curtain Areas:16 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom.16 ft -0 inches W 2 inches x 4 inches One tube for top and one tube for bottom. No Ceiling with the partition room. Angle-iron frame, finished with gray powder coating. Two doors each to be equipped with a keyed cylinder lock on door. FOR FULL PANELS Overall partition height of 8 feet, 5 inches with minimum 4-inch open clearance on the bottom of all panels except the doors.	Each Panel shall be in width of no more or no less than: 1/4-inch-thick clear polycarbonate.2 ft	0 inches	Panel5 ft	0 inches	Top and Bottom Tube9 ft	0 inches	Panel              10 ft 0 inches	Panel3 ft	7 inches	Door1 ft	9 inches	Panel7 ft	6 inches	Panel	7 ft	0 inches	Panel8 ft	0 inches	Panel             10 ft 0 inches	Panel             10 ft 0 inches	Panel6 ft	0 inches	Panel5 ft	4 inches	Panel              10 ft 0 inches	Panel8 ft	11 inches	Panel3 ft	7 inches	Door	Material shall be delivered to the Government-designated location. Government-furnished / not included:	Industrial sliding curtains for the two Section #6 openings.	Strip door for the Section #9 opening. Purchase only, no install requested. The cited vendor quote identifies the partition as a single room with polycarbonate panels and a door, with the above framing, finish, height, and lock requirements. <br/><br/><br/><strong>Additional Links:</strong><br/><a href='https://dodprocurementtoolbox.com/' target='_blank'>Department of Defense Procurement Toolbox</a><br/><a href='https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S226U4559&noticeType=CombinedSynopsisSolicitation' target='_blank'>PIEE Solicitation Module Link for W911S226U4559</a><br/><a href='https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf' target='_blank'>Registration Instructions for the PIEE Solicitation Module</a><br/><a href='https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml' target='_blank'>Web Based Training for the PIEE Solicitation Module</a>

[View original listing](https://sam.gov/opp/1dbf28e87e16456e9a6e78ff4f5b16db/view)