SAM #70Z08526SSNHEALYDOORS

USCGC HEALY Replacement Hangar Doors Request for Information

The United States Coast Guard (USCG) is seeking information from manufacturers for replacement hangar doors for the USCGC HEALY. - Government Buyer: - United States Coast Guard (USCG) - SFLC Procurement Branch 2 - OEMs and Vendors: - No specific OEMs or vendors are named in the notice - Products/Services Requested: - Pair of replacement hangar doors, including tracks and operator - Must fill a 17'-0" x 18'-0" hangar opening - Must allow unobstructed transit of an H-60 helicopter (folding rotor and tail variant) - Must meet MIL-DTL-24151 Type 1 Class 1 requirements (with exceptions for sections 3.4.2.5, 3.4.2.6, and 3.4.2.11) - Must operate in Arctic conditions - Must comply with NAVAIR Certification - Unique/Notable Requirements: - Arctic operational capability - Compliance with military and aviation standards - Accommodation for specific helicopter variant - Full technical details referenced in attached document

Description

REQUEST FOR INFORMATION (RFI)

USCGC HEALY Replacement Hangar Doors

DESCRIPTION

This notice is a Request for Information (RFI) only. This RFI is issued by the United States

Coast Guard (USCG) for information and planning purposes, pursuant to Federal Acquisition

Regulation (FAR) Part 10, Market Research. It does not constitute a Request for Proposal (RFP)

or a promise to issue an RFP in the future. All participants are advised that the Government will

not pay for any information or administrative costs that result from responding to this RFI; all

costs associated with responding to this RFI will be at the interested party’s expense. Not

responding to this RFI does not preclude participation in any future RFP, if any is issued.

2.0 PURPOSE

The purpose of this RFI is to increase the USCG’s understanding of companies that can manufacture a pair of replacement hangar doors along with their associated tracks and operator for the USCGC HEALY. The hangar door system shall have the following characteristics:

Completely fill the existing 17’-0” (x) x 18’-0” (H) hangar opening. Accommodate the transit of an H-60 helicopter (folding rotor and tail variant) with no obstructions or interferences Meet the requirements of a Type 1 Class 1 door in MIL-DTL-24151 with the following exceptions: 3.4.2.5, 3.4.2.6, 3.4.2.11 Operate in Arctic conditions Comply with NAVAIR Certification.

REFER TO THE ATTACHMENT FOR FULL DETAILS ON THIS REQUEST FOR INFORMATION. 

View original listing