Opportunity
Miami University and Ohio University Ionwave #1120262506
Miami University UEA Circuit 1130-1050 Medium-Voltage Electrical Connection
Posted
November 20, 2026
Respond By
December 04, 2026
Identifier
1120262506
NAICS
238210
Miami University is seeking a contractor for a medium-voltage circuit connection between campus buildings in Oxford, Ohio. - Government buyer: Miami University Physical Facilities Department, through the Facilities Contracting Office; the bid invitation also identifies Strategic Procurement. - Project: UEA Circuit 1130-1050 Connection, project MUN-270181, connecting the SH6:1130 and SH5:1050 circuits between US43 and US46. - Work requested: Install and route medium-voltage cable through existing tunnels and manholes; splice three-conductor cable to single-conductor cable; install manhole cable supports; and provide 600-amp dead-break terminations at pad switches. Coordinate grounding with the University. - Products and quantities: Three 4/0 15 kV MV-105 133% single-conductor feeders with 4/0 THWN ground; 3/C 4/0 15 kV MV-105 armored cable; Underground Devices, Inc. RA11 racking arms and CR36-B stanchions (two of each per existing manhole); 3-inch 3M Scotch 77 arc-proof wrap; cable tags; and fan-out kits as required. Cable quantities beyond the three single-conductor feeders are not stated. - Named OEMs and manufacturers: Underground Devices, Inc. (manhole racking), Okonite (CLX/Okoguard cable), and Prysmian, Kerite, and Southwire (named cable alternatives). Other named manufacturers/products in the Division 26 standards include 3M, S&C, Schneider, Eaton, ABB, Kohler, Cummins, Caterpillar, CREE, e-conolight, Area Architectural Lighting, and Valmont Industries. - Notable requirements: Conductors must be copper. Cable must be neatly routed, grouped, supported, and tagged; install cable tags in manholes and at both ends and every 50 linear feet in tunnel cable tray. Apply arc-proof wrap half-lapped as specified. Racking hardware must use 316 stainless steel. The general contract estimate is $345,000; prevailing wages, domestic steel, and a 5% EDGE participation goal apply. - Performance: This is a one-time construction project with an approximately three-month performance window and construction, cabling, and substantial-completion milestones. No subscription or option years are stated.
Description
Miami University is soliciting bids for the UEA Circuit 1130-1050 Connection, described in the project documents as a new circuit tie between the SH6:1130 and SH5:1050 circuits between US43 and US46. The electrical work includes new medium-voltage cable and terminations, cable routing through existing tunnels and manholes, and associated racking and installation labor. Prevailing wage rates for Butler County apply to trade labor, and bids must be submitted on OFCC forms included in the Front End documents. A pre-bid meeting is scheduled for November 30, 2026, at Cole Service Building, Room 116, Oxford, Ohio.