Opportunity
Federal Register #2026-23679
FAA directive requires inspections of Airbus helicopter tail rotor blade assemblies
Buyer
Federal Aviation Administration (FAA)
Posted
November 20, 2026
Identifier
2026-23679
NAICS
336413
The FAA issued a safety directive for specified Airbus EC135 and EC635 helicopters, not a request to purchase goods or services. - Government buyer and issuing agency: U.S. Department of Transportation, Federal Aviation Administration (FAA). - OEMs named: Airbus Helicopters Deutschland GmbH (AHD) and Airbus Helicopters (AH). - Covered models: EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+. - Required actions: Conduct repetitive inspections of affected tail rotor blade (TRB) assemblies for cracks associated with intergranular corrosion; remove cracked assemblies from service; and replace an affected part to end the repetitive-inspection requirement. - Installation restriction: Certain TRB assemblies may not be installed unless specified conditions are met. - The directive references European Union Aviation Safety Agency (EASA) requirements and includes FAA-specific inspection-method provisions. - No products or services are being procured; no quantities, part numbers, or contract value are provided.
Description
The FAA is adopting a final airworthiness directive for specified Airbus Helicopters Deutschland GmbH helicopter models. It requires repetitive inspections of certain tail rotor blade assemblies for cracks and, depending on inspection results, removal of cracked assemblies and replacement of an affected part. The directive also prohibits installing certain tail rotor blade assemblies unless specified requirements are met. It addresses the risk of tail rotor blade assembly separation and reduced helicopter control.