Opportunity
SAM #70ZU02_MUNRO_DS_FQ4
USCGC MUNRO FY27 dockside repairs, systems maintenance, and equipment installation
Buyer
CG-SEA-C22
Posted
November 20, 2026
Respond By
December 11, 2026
Identifier
70ZU02_MUNRO_DS_FQ4
NAICS
336611, 488390
The U.S. Coast Guard is conducting market research for a 12-work-item dockside repair and alteration availability for USCGC MUNRO in Alameda, California. - Government buyer: U.S. Coast Guard (USCG), Surface Forces Logistics Center, Contracting & Procurement Division, Branch #2, Long Range Enforcer section. - Scope: Ship repair, testing, preservation, equipment installation, and deck-covering work. The contractor is expected to provide the labor, materials, equipment, and other resources needed. - Tasks include fire detection inspection and testing; fire prevention; five-year relief-valve certification; refrigeration hose renewal; compressed-air receiver inspection and testing; stern boat launch and recovery maintenance; hangar-door preservation; incinerator and oily-water-separator (OWS) work; polymeric deck-covering repairs; dry-air compressor installation; and hangar deck-covering renewal. - Named OEMs and vendors: Atlas Copco (compressors, dryers, receiver and accessories); Elex (dry-air compressor equipment installation work item); Atlas (600 S WS incinerator); CornellCar (heated pilot-house window); and Belzona (example epoxy repair-kit brand, or equivalent). - Government-furnished equipment and materials: Includes Atlas Copco compressor and dryer equipment, OWS components and consumables, stern-boat launch/recovery parts, and other listed equipment. Equipment quantities and part numbers are detailed below; some equipment is repeated in the source item list and is retained as separate entries. - Notable technical requirements: Qualified technical representatives and inspections/tests are required for relevant systems; the work includes fire-watch communications when the alarm system is unavailable, hydrostatic testing, approved non-destructive examination of receiver welds, refrigerant and oily-waste handling, operational demonstrations, preservation/coating standards, and system commissioning. Hangar deck renewal covers approximately 2,400 square feet; polymeric covering work includes estimated localized repairs and resealing. - Market-research response information: Interested firms are asked for company, business-size, certification, capability, and relevant past-performance information. Technical drawings require a signed DHS-110006 non-disclosure agreement and active Joint Certification Program certification.
Description
The United States Coast Guard (USCG) Surface Forces Logistics Center – Contracting & Procurement Division (SFLC-CPD) Branch #2 Long Range Enforcer (LRE) section is conducting market research in order to identify firms who possess the capabilities to satisfy the USCG’s requirement.
The requirement is for the United States Coast Guard (USCG) MUNRO (WMSL 755) Dockside repairs during fiscal year (FY) 27 fiscal quarter (FQ)4. NAICS Code 336611 – Ship Build and Repairing The Place of Performance is the USCGC MUNRO’s homeport located in Alameda, CA.
Anticipated Period of Performance for this requirement is 27 July 2027 through 27 October 2027. The Contractor shall furnish all necessary labor, materials, services, equipment, supplies, power, accessories, facilities and such other things as necessary, except as otherwise specified, to perform dockside, repairs and alterations to the USCGC MUNRO in accordance with thesolicitation, schedule and specifications.
WORK ITEMS include (but not limited to): WORK ITEM 1: Fire Detection System, Inspect and Test WORK ITEM 2: Fire Prevention, Provide WORK ITEM 3: Miscellaneous System Relief Valves, 5 Year Certification WORK ITEM 4: Refrigeration Plant Flexible Hoses, Renew WORK ITEM 5: Compressed Air Receivers, Clean, Inspect and Test WORK ITEM 6: Stern Boat Launch and Recovery, Level II WORK ITEM 7: Helo Hangar Door Curtain Assembly, Preserve (100 %) WORK ITEM 8: Incinerator, Inspect and Test WORK ITEM 9: Oily Water Separator (OWS) System, Inspect and Groom WORK ITEM 10: Deck Covering (Polymeric), Repair and Seal WORK ITEM 11: Elex Dry Air Compressor Equipment, Install WORK ITEM 12: Deck Covering (Slip-Resistant) Hangars, Renew SUBMISSION OF INFORMATION: Interested parties having the capabilities necessary to meet or exceed the stated requirements ae invited to provide information to contribute to this Sources Sought Notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail, with subject line: SSN MUNRO DS FY27Q4, to Mr.Jonathan Myette, at Jonathan.R.Myette@uscg.mil no later than December 11, 2026 12:00pm EST with the following:
Name of Company, Address and Unique Entity Identification Number (UEID) 1.Point of Contact and Phone Number 2.Business Size applicable to the NAICS Code: 3.8(a) Small Business Concern 1.HubZone Small Business Concern 2.USCGC STONE DS FQ1 FY26 3.Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) 4.Veteran Owned Small Business Concern (VOSBC) 5.Economically Disadvantaged Woman-Owned Small Business (EDWOSB) Concern 6.Woman-Owned Small Business (WOSB) Concern 7.Small Business Concern 8.Large Business Concern 9.Documentation Verifying Small Business Certification 10.Statement: Statement on how your company will complete the work items and that company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 11.Past Performance information: Evidence of experience in work in similar in type, size, scope, and complexity to include contract numbers, project titles, dollar amounts, and point of contacts to include e-mail address and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.
SAM: Interested parties should register in the System for Award Management (SAM), formerly known as Central Contractor Registration (CCR), as prescribed in FAR Subpart 4.1102(a). SAM can be obtained by accessing the internet at www.sam.gov or calling the Federal Service Desk (FSD) at 1-866-606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when deciding on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Currently no solicitation exists; therefore, do not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on the SAM.gov website, formerly Federal Business Opportunities (FedBizOpps). It is the potential offeror’s responsibility to monitor the SAM.gov website for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation. To receive the technical package and drawings associated with this requirement interested firms will need to complete and sign DHS-110006 Non-Disclosure Agreement and provide their active Joint Certification Program (JCP) certification number. You may do so now in order to receive the drawings package immediately upon release of the Solicitation.