Opportunity

SAM #SPMYM327Q7006

Portsmouth Naval Shipyard specialty fasteners

Buyer

DLA Maritime Portsmouth

Posted

November 19, 2026

Respond By

December 01, 2026

Identifier

SPMYM327Q7006

NAICS

332722

DLA Maritime – Portsmouth is seeking specialty fasteners for Portsmouth Naval Shipyard. - Government buyer: U.S. Navy, Defense Logistics Agency (DLA) Maritime – Portsmouth; requiring office code 245. The notice names Mihaela Zouak. - OEMs and vendors: No fastener OEM or supplier is named in the procurement documents. - Products requested: 14 fastener line items, totaling 139 pieces: alloy-steel capscrews, socket-head capscrews, and self-locking machine screws. Dimensions, thread specifications, material grades, finishes, military standards, and quantities are detailed below. - Important discrepancy: The final 5/8-11 self-locking countersunk capscrew is described as 1 inch long in the attachment and 1-1/2 inches long in the initial release summary; confirm the required length before quoting. - Documentation and quality: Each applicable fastener item requires a Certificate of Compliance (DI-MISC-81356A) and a Certification/Data Report (DI-MISC-82386). Reports must include quantitative chemical and mechanical test results; specified testing requires the proper number of specimens and new, untested fasteners. - Other notable requirements: Fasteners with specified head markings must carry at least six dots. Non-manufacturers must provide traceability documentation. The procurement is a 100% small-business set-aside, uses Lowest Price Technically Acceptable evaluation, and accepts one quote per vendor.

Description

Solicitation Overview This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM327Q7006. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 Efective Date 03/13/2026 and DFARS Change Notice 20260702. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.ecfr.gov https://www.acquisition.gov/content/list-sections-affected http://www.acq.osd.mil/dpap/dars/change_notices.html The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% SBSA. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Only one quote per vendor will be accepted. Interested parties must fill out the required request for quote paperwork to be considered for award. It is in the attachment section and titled “RFQ SPMYM327Q7006”. If you are not the manufacturer, proof of traceability is required by the solicitation deadline.

Required Items The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: Item | Description | Quantity | Unit

0001 — HEX SLF LKG HEAD CAPSCREW — 6 EA HEX HEAD SLF LKG CAPSCREW, 1/2 -13UNC-3A X 7-1/2" LG, MIL-DTL-1222J TY-I, ALLOY STEEL, GRADE-5, ZINC PLATED IAW ASTM B633 TY-II SC-2; SELF LKG IAW MIL-DTL- 18240F AMEND-1, ANY TYPE. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY)

0002 — DATA REQUIREMENTS — 1 EA — NSP A001 — EXHIBIT A, SEQ A001 See Exhibit “A” Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “A” Seq A002: CDRL DI-MISC-82386 (Certification / Data Report)

0003 — SLF LKG HEX SOCKET — 4 EA SLF LKG HEX SOCKET (CYLINDRICAL) HEAD CAPSCREW, 1-1/2 -6UNC-2A X 3-1/2” LG, FF-S-86H ALLOY STEEL, TYPE-VI, MIL-DTL-18240F(1) TYPE-N. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).

0004 — DATA REQUIREMENTS — 1 EA — NSP B001 — EXHIBIT B, SEQ B001 See Exhibit “B” Seq B001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “B” Seq B002: CDRL DI-MISC-82386 (Certification / Data Report)

0005 — HEX SLF LKG HEAD CAPSCREW — 3 EA HEX HD CAPSCREW, 1/2 - 13UNC-2A X 1” LG, STL, MIL-DTL-1222J, TYPE-I, GR B-7.

0006 — DATA REQUIREMENTS — 1 EA — NSP C001 — EXHIBIT C, SEQ C001 See Exhibit “C” Seq C001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “C” Seq C002: CDRL DI-MISC-82386 (Certification / Data Report)

0007 — HEX SLF LKG HEAD CAPSCREW — 8 EA HEX HEAD CAPSCREW 1/2-13UNC-2A X 2” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL TO BE ALLOY STEEL GRADE-B7,

0008 — DATA REQUIREMENTS — 1 EA — NSP D001 — EXHIBIT D, SEQ D001 See Exhibit “D” Seq D001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “D” Seq D002: CDRL DI-MISC-82386 (Certification / Data Report)

0009 — HEX HEAD CAPSCREW — 5 EA HEX HEAD CAPSCREW 1-8UNC-2A X 4” LONG, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED.

0010 — DATA REQUIREMENTS — 1 EA — NSP E001 — EXHIBIT E, SEQ E001 See Exhibit “E” Seq E001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “E” Seq E002: CDRL DI-MISC-82386 (Certification / Data Report)

0011 — HEX HEAD CAPSCREW — 4 EA HEX HEAD CAPSCREW 1-8UNC-2A X 4-1/4” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED

0012 — DATA REQUIREMENTS — 1 EA — NSP F001 — EXHIBIT F, SEQ A001 See Exhibit “F” Seq F001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “F” Seq F002: CDRL DI-MISC-82386 (Certification / Data Report)

0013 — CAPSCREW — 4 EA HEXAGON SOCKET (CYLINDRICAL) HEAD CAP SCREW, 1-8UNRC-3A X 2-1/4 IN LG, NICUAL, FF-S-86J TY-VI, QQ-N-286D, CD, AN, AH.

0014 — DATA REQUIREMENTS — 1 EA — NSP G001 — EXHIBIT G, SEQ G001 See Exhibit “G” Seq G001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “G” Seq G002: CDRL DI-MISC-82386 (Certification / Data Report)

0015 — FLAT HEAD SCREW — 6 EA FLAT HEAD 82 DEGREE SLF LKG MACHINE SCREW, 0.500-13UNC-3A X 2.000 IN. LG. MFR IAW FF-S-92D TYPE III (CROSS RECESS DESIGN I) STYLE 2C (FLAT HEAD 82 DEGREE). MAT’L IS CADMIUM PLATED STEEL. SLF LKG IAW MIL-DTL-18240F AMEND 1 TYPE “L OR P”. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).

0016 — DATA REQUIREMENTS — 1 EA — NSP H001 — EXHIBIT H, SEQ H001 See Exhibit “H” Seq H001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “H” Seq H002: CDRL DI-MISC-82386 (Certification / Data Report)

0017 — SAME AS ITEM 0015 — 30 EA

0018 — DATA REQUIREMENTS — 1 EA — NSP I001 — EXHIBIT I, SEQ I001 See Exhibit “I” Seq I001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “I” Seq I002: CDRL DI-MISC-82386 (Certification / Data Report)

0019 — SOCKET HEAD CAP SCREW — 16 EA SOCKET HEAD CAP SCREW, 1/4-20UNC-3A X 5/8 LNG, MIL-DTL-1222J TY-II, NICUAL, GR-500, QQ-N-268G, CD, ANLD, AH.

0020 — DATA REQUIREMENTS — 1 EA — NSP J001 — EXHIBIT J, SEQ J001 See Exhibit “J” Seq J001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “J” Seq J002: CDRL DI-MISC-82386 (Certification / Data Report)

0021 — HEX HEAD CAP SCREW — 32 EA HEX HEAD CAP SCREW, 5/16-18UNC-2A X .875 LNG, MIL-DTL-1222J TY-I, NICUAL, GR-500, QQ-N-286G.

0022 — DATA REQUIREMENTS — 1 EA — NSP K001 — EXHIBIT K, SEQ K001 See Exhibit “K” Seq K001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “K” Seq K002: CDRL DI-MISC-82386 (Certification / Data Report)

0023 — SOCKET HEAD CAP SCREW — 3 EA HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 3/4-10UNC-2A X 2 ¼ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY).

0024 — DATA REQUIREMENTS — 1 EA — NSP L001 — EXHIBIT L, SEQ L001 See Exhibit “L” Seq L001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “L” Seq L002: CDRL DI-MISC-82386 (Certification / Data Report)

0025 — SOCKET HEAD CAP SCREW — 2 EA HEXAGON SOCKET CYLINDRICAL HEAD CAP SCREW, 1/2-13UNC-2A X 3 LNG, FF-S-86J TY-VY, NICU, QQ-N-281D AMEND 2. THREADS NEED TO BE EXTENDED TO WITHIN 1/4 IN OF HEAD.

0026 — DATA REQUIREMENTS — 1 EA — NSP M001 — EXHIBIT M, SEQ M001 See Exhibit “M” Seq M001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “M” Seq M002: CDRL DI-MISC-82386 (Certification / Data Report)

0027 — SOCKET HEAD CAP SCREW — 16 EA HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 5/8-11UNRC-3A X 1 ½ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE L OR P . MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY)

0028 — DATA REQUIREMENTS — 1 EA — NSP N001 — EXHIBIT N, SEQ N001 See Exhibit “N” Seq N001: CDRL DI-MISC-81356A (Certificate of Compliance). See Exhibit “N” Seq N002: CDRL DI-MISC-82386 (Certification / Data Report). NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.

FAR Clauses and Provisions 52.203-19 — Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7 — System for Award Management 52.204-10 — Reporting Executive Compensation and First-Tier Subcontract Awards 52.204-13 — System for Award Management Maintenance 52.209-11 — Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law 52.211-14 — Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use. 52.211-15 — Defense Priority and Allocation Requirements 52.212-1 — Instructions to Offerors—Commercial Products and Commercial Services 52.212-2 — Evaluation—Commercial Products and Commercial Services 52.212-4 — Contract Terms and Conditions—Commercial Products and Commercial Services 52.219-6 — Notice of Total Small Business Set-Aside 52.219-28 — Post-Award Small Business Program Representation 52.222-3 — Convict Labor 52.222-19 — Child Labor—Cooperation with Authorities and Remedies 52.222-36 — Equal Opportunity for Workers with Disabilities 52.222-50 — Combating Trafficking in Persons 52.222-90 — Addressing DEI Discrimination by Federal Contractors 52.226-8 — Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33 — Payment by Electronic Funds Transfer—System for Award Management 52.232-39 — Unenforceability of Unauthorized Obligations 52.232-40 — Providing Accelerated Payments to Small Business Subcontractors 52.233-3 — Protest after Award 52.233-4 — Applicable Law for Breach of Contract Claim 52.240-90 — Security Prohibitions and Exclusions Representations and Certifications See attached clauses and provisions for full text 52.240-91 — Security Prohibitions and Exclusions See attached clauses and provisions for full text 52.240-93 — Basic Safeguarding of Covered Contractor Information Systems See attached clauses and provisions for full text 52.242-15 — Stop-Work Order 52.243-1 — Changes—Fixed Price 52.246-1 — Contractor Inspection Requirements 52.247-34 — F.o.b. Destination 52.252-1 — Solicitation Provisions Incorporated by Reference See attached clauses and provisions for full text 52.252-2 — Clauses Incorporated by Reference See attached clauses and provisions for full text 52.252-5 — Authorized Deviations in Provisions See attached clauses and provisions for full text 52.252-6 — Authorized Deviations in Clauses See attached clauses and provisions for full text

DFARS Clauses and Provisions 252.203-7000 — Requirements Relating to Compensation of Former DoD Officials 252.203-7002 — Requirement to Inform Employees of Whistleblower Rights 252.203-7005 — Representation Relating to Compensation of Former DoD Officials 252.204-7003 — Control of Government Personnel Work Product 252.204-7008 — Compliance with Safeguarding Covered Defense Information Controls 252.204-7012 — Safeguarding Covered Defense Information and Cyber Incident Reporting 252.204-7015 — Notice of Authorized Disclosure of Information for Litigation Support 252.204-7016 — Covered Defense Telecommunications Equipment or Services--Representation 252.204-7017 — Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation 252.204-7018 — Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.240-7997 — NIST SP 800-171 DoD Assessment Requirements. 252.204-7021 — Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement 252.204-7022 — Expediting Contract Closeout 252.204-7024 — Notice on the use of the Supplier Performance Risk System 252.204-7025 — Notice of Cybersecurity Maturity Model Certification Level Requirements 252.215-7013 — Supplies and Services Provided by Nontraditional Defense Contractors 252.223-7008 — Prohibition of Hexavalent Chromium 252.225-7000 — Buy American--Balance of Payments Program Certificate—Basic 252.225-7001 — Buy American and Balance of Payments Program—Basic 252.225-7002 — Qualifying Country Sources as Subcontractors 252.225-7012 — Preference for Certain Domestic Commodities 252.225-7048 — Export-Controlled Items 252.225-7059 — Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation 252.225-7060 — Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.232-7003 — Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 — Wide Area WorkFlow Payment Instructions See attached clauses and provisions for full text 252.232-7010 — Levies on Contract Payments 252.243-7001 — Pricing of Contract Modifications 252.244-7000 — Subcontracts for Commercial Products or Commercial Services 252.247-7023 — Transportation of Supplies by Sea--Basic 5452.233-9001 — Disputes: Agreement To Use Alternative Dispute Resolution (ADR) See attached clauses and provisions for full text

DLA Procurement Notes (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023) C04 Unused Former Government Surplus Property (SEP 2021) C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020) C20 Vendor Shipment Module (VSM) (MAY 2026) E05 Product Verification Testing (MAY 2020) H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024) H18 Defense Priorities and Allocations System (DPAS) (JUL 2026) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024) L09 Reverse Auction (OCT 2016) L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016) L31 Additive Manufacturing (JUN 2018) L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

Local Clauses (See Attachment for Full Text) YM3 A1: Additional Information YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment) YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C506: Qualified Products for Award YM3 C524: Controlled Industrial Material YM3 C528: Specification Changes YM3 C531: Restrictions on K-Monel YM3 D1: Deteriorative Material Marking YM3 D2: Marking of Shipments YM3 D2.2: Marking of Shipments YM3 D4: Preparation for Delivery YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E4: Disposition of Nonconforming Material YM3 E504: Notice of Constructive Acceptance Period YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 H500: Special Provisions for Threaded Products YM3 M8: Single Award for All Items (All or none procurements)

Submission Information This announcement will close 12/01/2026 01:00 PM EST. The Point of Contact for this solicitation is Mihaela Zouak who can be reached at Mihaela.c.zouak.civ@us.navy.mil. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer the manufacturer’s name, location, and business size must be provided. Please submit quotes via email to: Mihaela.c.zouak.civ@us.navy.mil, and PNSYSupplyQuotations@us.navy.mil All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. *If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

View original listing