Opportunity
Canyon School District Ionwave #27-00051CP-P5
Canyons School District Playground Artificial Turf Installation and Maintenance
Posted
November 18, 2026
Respond By
December 09, 2026
Identifier
27-00051CP-P5
NAICS
561730, 238990
Canyons School District is seeking qualified contractors for playground artificial turf installation and ongoing maintenance at district facilities. - Government buyer: Canyons School District (CSD), Department of Purchasing & Procurement; work involves CSD Facilities. CSD is the lead district for the EdPAC Utah State Education Purchasing Advisory Committee cooperative. - OEMs and vendors: No turf manufacturer, OEM, or proposing vendor is named. Contractors must be authorized by the turf manufacturer and provide an authorization letter. IonWave is identified as the proposal submission platform. - Requested work: Supply and install artificial turf over existing playground tile or poured-in-place rubber, prepare and edge perimeters, remediate gaps, provide temporary fencing, groom turf annually, replenish infill, conduct impact testing, perform emergency repairs, and provide mobilization. - Pricing evaluation quantities—not guaranteed order quantities: 6,000 SF of turf supply and installation; 400 LF of perimeter saw-cutting and edging; 700 LF of buffing and gap remediation; 500 LF of temporary fencing; 6,000 SF of annual grooming; 10 bags of infill; two impact tests; and one mobilization fee. Bidders also provide hourly rates for standard-hours and after-hours supervisor and laborer repairs, plus a discount off the manufacturer’s published list price. - Turf and installation requirements: Polyethylene dual-green yarn with thatch; minimum 50 oz./sq. yd. pile weight and 74 oz./sq. yd. total system weight; at least 1.125-inch pile height; 3/8-inch tufting gauge; 15-foot roll width; and perforated drainage backing. Installation includes substrate preparation, full glue-down or tape-on application, 12-inch outdoor seaming tape, polyurethane adhesive, and perimeter kerfing. U.S. final manufacture is preferred. - Safety and qualifications: Active Utah S330 or B100 contractor license, at least five consecutive years of relevant institutional, municipal, or school-district experience, and manufacturer-certified installer status. Turf must meet ASTM F1292 impact and ASTM F1951 accessibility requirements. A Certified Playground Safety Inspector must use a calibrated tri-axial accelerometer; reports must show Gmax below 200g and HIC below 1,000. - Warranties and service: A minimum 10-year material life expectancy is required, with a 15-year full-replacement material warranty preferred; workmanship coverage must be at least five years. Grooming includes de-compaction, debris removal, infill redistribution or replenishment, and cross-grooming. Temporary work-zone fencing is specified as six-foot chain-link, with a privacy windscreen in the operations plan. - Estimated value: No government estimate is provided; an indicative planning range is $100,000–$500,000. Actual value will depend on awarded rates and work ordered. - Contract term: One year from award, with up to four additional one-year extensions at CSD’s option.
Description
Canyons School District seeks proposals for artificial turf installation over existing playground tiles and poured-in-place surfacing at district locations, along with repairs and grooming services. The work includes site preparation, installation, impact-attenuation testing, emergency repairs, and scheduled preventative grooming, as detailed in the attached scope of work. Proposals must be submitted electronically through Euna Procurement powered by Ion Wave, and suppliers must meet specified Utah licensing, installer certification, ASTM, and warranty requirements. The contract is for one year, with options for up to four additional annual extensions.