Opportunity
SAM #FA8601-27DiamondDetector
Air Force Market Research for Diamond Detector Telescope and Nano-Aerosol Analyzer Systems
Buyer
Air Force Life Cycle Management Center
Posted
November 19, 2026
Respond By
December 01, 2026
Identifier
FA8601-27DiamondDetector
NAICS
334516
The Department of the Air Force is gathering market information on scientific instruments for Air Force research and education. - Government buyer - Department of the Air Force; the diamond detector requirement is associated with the Air Force Institute of Technology (AFIT) at Wright-Patterson AFB. The initial notice also identifies AFLCMC PZIO. - One attachment requests a Nano-Aerosol Analyzer, also called a Nano-Aerosol Profiling System; its specific office is not identified. - Opportunity and manufacturers - The initial notice is a Sources Sought/RFI for market research, not a request for quotes or proposals. It seeks a Diamond Detector Telescope System with matching amplification. - An attachment also describes a Nano-Aerosol Analyzer. No OEM or vendor is named for either requested instrument. Respondents are asked to identify their proposed manufacturer, make, model, and configuration. - CAEN is named only as an example of government-owned digitizers the diamond detector must work with; it is not identified as the manufacturer of the requested equipment. - Products and quantities - Diamond detector telescope: 1, with four separately read-out SCVD diamond layers, each 4 mm × 4 mm × 0.5 mm. No part number is specified. - Amplification: 4 individual amplifiers or 1 four-channel amplifier. No part number is specified. - Nano-Aerosol Analyzer/Nano-Aerosol Profiling System: quantity and part number are not specified; the end item is to include accessories and software. - Notable technical and delivery requirements - The diamond telescope must meet timing resolution of 1 ns or less, support a linear energy range up to at least 80 MeV, and achieve relative energy resolution of 0.3% or better under the specified measurement conditions. It must be compatible with government-owned CAEN digitizers, such as the VX1730B. - Amplifier outputs must be no greater than 2 V, have a 50–250 ns FWHM pulse width and 50-ohm impedance, and include IEC61000-equivalent integrated input protection. Cables are required, including four 1-meter, 50-ohm output cables with BNC and MCVX connectors at the specified ends. - The telescope package requires at least 8 hours of manufacturer-provided training for up to 4 people and a six-month warranty. The analyzer request also includes on-site training and warranty support, with terms unspecified. - The initial notice calls for delivery within 120 days after award to Wright-Patterson AFB. The analyzer attachment does not specify a delivery schedule. - The Air Force seeks information on technical compliance, OEM or distributor status, ISO 9001 certification, past performance, country of origin and assembly, commercial sales history, and delivery capability. It is particularly interested in domestic small businesses and possible small-business subcontracting opportunities.
Description
SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION (RFI)
United States Air Force – Air Force Institute of Technology (AFIT)
Diamond Detector Telescope and Integrated Amplification System
SECTION 1: GENERAL INFORMATION
ATTACHMENTS: STATEMENT OF WORK & INSTRUCTIONS
Notice Type: Sources Sought / Market Research Synopsis Document Identifier: FA8601-27DiamondDetector Procurement Title: Diamond Detector Telescope System Primary NAICS Code: 334516 – Analytical Laboratory Instrument Manufacturing (Small Business Size Standard: 1,000 employees) Product Service Code (PSC): 6640 – Laboratory Equipment and Supplies Place of Delivery / Performance: F.O.B. Destination Air Force Institute of Technology (AFIT/ENP) Wright-Patterson AFB, OH 45433-7765 Required Delivery Date (RDD): 120 days after contract award Response Due Date: 1 December 2026 by 4:00 PM EST
SECTION 2: PURPOSE AND DISCLAIMER
This is a Sources Sought Notice / Request for Information (RFI) issued by the United States Air Force, Air Force Institute of Technology (AFIT/ENP), Wright-Patterson AFB, OH. This notice is issued solely for market research, information, and planning purposes pursuant to Federal Acquisition Regulation (FAR) Part 10.
This announcement does not constitute a Request for Quote (RFQ), Request for Proposal (RFP), or Invitation for Bid (IFB). It does not commit the Government to award a contract, issue a solicitation, or pay for any information submitted in response to this notice.
Objective: The Government is conducting market research to identify qualified, capable, and responsible domestic vendors—with particular emphasis on domestic small businesses (including Small Businesses, 8(a), HUBZone, Service-Disabled Veteran-Owned Small Businesses [SDVOSB], and Women-Owned Small Businesses [WOSB])—capable of supplying a commercial, state-of-the-art Diamond Detector Telescope System and matching amplifiers. The responses received will directly inform the Contracting Officer's acquisition strategy, specifically whether to proceed as a competitive Total Small Business Set-Aside, a socioeconomic set-aside, or an alternative commercial procurement strategy.
SECTION 4: CAPABILITY STATEMENT / VENDOR QUESTIONNAIRE
Interested concerns capable of providing the required items are invited to submit a concise Capability Statement (not to exceed 5 pages) addressing the following items:
Part A: Company Profile
Company Name, Physical Address, and Website. Point of Contact: Name, title, phone number, and email address. Government Identifiers: Commercial and Government Entity (CAGE) Code and Unique Entity Identifier (UEI). Socioeconomic Status: Specify your business size under NAICS 334516. If classified as a small business, identify any applicable socioeconomic sub-categories: Small Business (SB) Small Disadvantaged Business / 8(a) Service-Disabled Veteran-Owned Small Business (SDVOSB) Women-Owned Small Business (WOSB) / Economically Disadvantaged WOSB (EDWOSB) Historically Underutilized Business Zone (HUBZone) Small Business
Part B: Technical Capability & Past Experience
Salient Characteristics Compliance: Provide a direct statement confirming whether your company can supply a diamond detector telescope and amplification package meeting all specifications outlined in the attached Statement of Work and Identify the proposed make, model, and configuration. Manufacturing & Distributorship: Are you the Original Equipment Manufacturer (OEM) of this hardware? If acting as a distributor, reseller, or technical representative, identify the OEM and explain how your supply agreement guarantees delivery, technical warranty coverage, and compliance with the Non-Manufacturer Rule (FAR 19.505). Quality Standards: Attach or provide proof of active ISO 9001 certification (ISO 9001:2015 or ISO 9001:2026). Past Performance: Provide up to two (2) examples of previous sales or deliveries of comparable diamond radiation detection instruments to federal laboratories, academic institutions, or research entities within the past three (3) years.
Part C: Sourcing and Lead Time
Country of Origin (COO): Identify the manufacturing origin and country of assembly for the detector layers, telescope assembly, and amplifiers to support compliance verification under the Buy American Act (BAA) and Trade Agreements Act (TAA). Delivery Schedule: State whether your company can guarantee F.O.B. Destination delivery to Wright-Patterson AFB, OH. Include realistic manufacturing lead times and international transit allowances.
SECTION 5: SUBMISSION INSTRUCTIONS
Format: Submissions must be transmitted electronically in Adobe PDF or Microsoft Word format. Transmission: Email responses to the Contract Specialist / Contracting Officer: Primary Contact: Danara Barlow at danara.barlow@us.af.mil Secondary Contact: Jessica M. Stamper at jessica.stamper.2@us.af.mil Subject Line: FA8601-27DiamondDetector Deadline: Responses must be received no later than 1 December 2026 by 4:00 PM EST. Incomplete submissions or submissions received after the closing date may not be reviewed. Confidentiality: If the submission contains proprietary business information, mark the specific pages and sections accordingly. The Government will handle all proprietary data in accordance with applicable federal disclosure laws.