Opportunity

Federal Register #2026-23579

FAA proposal expands screw-replacement airworthiness requirements for Dassault Falcon airplanes

Buyer

Federal Aviation Administration (FAA), U.S. Department of Transportation

Posted

November 19, 2026

Respond By

January 04, 2027

Identifier

2026-23579

The FAA proposes expanded safety requirements for certain Dassault Falcon airplanes; this is a rulemaking, not a procurement opportunity. - Government authority: Federal Aviation Administration (FAA), U.S. Department of Transportation. - OEM: Dassault Aviation, manufacturer of the affected FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. Dassault Falcon Jet Corporation is identified as a contact for Dassault material; the European Union Aviation Safety Agency (EASA) directive is incorporated by reference. - Proposed requirements: Replace certain Decomatic titanium screws, expand the affected aircraft and replacement locations, revise compliance times, and restrict installation of affected parts in specified circumstances. - Technical references: EASA AD 2025-0228R1 and Dassault Service Bulletin 7X-467, Revision 6, including its erratum. - Safety rationale and scope: Failure of a screw in a critical location could reduce aircraft structural integrity. The FAA estimates 52 U.S.-registered airplanes would be affected. - Commercial scope: No products or services are being purchased; no quantities, contract value, or period of performance are specified.

Description

The FAA proposes to supersede Airworthiness Directive 2024-14-09 for certain Dassault Aviation FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. The proposed directive would retain existing requirements for replacing certain titanium screws and expand the affected airplanes and screw-replacement locations. It would also revise replacement compliance times and limit installation of affected parts under specified conditions. The proposal addresses the risk that failure of an affected screw in a critical location could reduce an airplane’s structural integrity. Comments are due January 4, 2027.

View original listing