Opportunity
SAM #N4523A27Q1005
Navy Dive Boat 60DS1701 Maintenance, Repair and Preservation
Buyer
Puget Sound Naval Shipyard
Posted
November 18, 2026
Respond By
November 27, 2026
Identifier
N4523A27Q1005
NAICS
336611
The U.S. Navy is seeking industry capability information for a comprehensive refit of Dive Boat 60DS1701. - Government buyer: Department of the Navy, U.S. Navy; Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), under NAVSEA. Office: NWRMC Industry Management; Supervisor, Code 101.13. - Vessel and work location: One 65.4-foot aluminum dive boat, built by Marine Group Boat Works. Work is to be performed at a contractor facility in the Puget Sound region, from Olympia north to Bellingham, Washington. - Major work: Docking and undocking; hull blasting, coating, ultrasonic inspections at 300 sites and repairs; fender and anode replacement; tank and void cleaning and preservation; structural, watertight-door, deck, propulsion-shaft, steering, HVAC and machinery work; engine and generator servicing; and dock and sea trials. - Named OEMs and product brands: Marine Group Boat Works (vessel builder), Cummins (QSL9 propulsion engine), Kohler (32EKOZD generator), Espar (heaters), and Propspeed (propeller coating). Qualified Cummins and Kohler technicians are required for the specified engine and generator services. - Notable requirements: Clean, ventilate and gas-free five tanks; dispose of approximately 500 gallons of diesel and load 824 gallons of new fuel, divided evenly between the port and starboard tanks. Obtain laboratory certification of potable-water safety. Engine-room decontamination must leave no chemical residue. Conduct baseline and final trials and demonstrate proper operation. - Opportunity status: Market research for contractor capabilities and experience, not a request for quotations or a commitment to issue a solicitation.
Description
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation in support of one (1) Dive Boat 60DS1701. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work.
Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.
60DS1701
• Length: 65.4 FT • Width: 22 FT • Age: 10 YRS • Hull Type: Aluminum • Draft: 3.5 FT • Full Displacement: 48.05 L Tons • Light Load: 8000 LBS
Scope Overview:
Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Upon docking the vessel; wash and clean the exterior surfaces of the vessel. Remove Rubber Fenders. Replace Zinc Anodes. Hull Blasting and Preservation. Hull and Freeboard Visual Inspection. Hull and Freeboard Ultrasonic Test Inspection. Repair D-Fender Corrosion. Inspect Quick Acting Watertight Doors. Open, Pump, Clean, Ventilate, and Gas Free Tanks/Voids, Including Freshwater System. Tank/Void Visual Inspection Gunnel Repair. Main Propulsion and Steering Repairs. Main Cabin and Interior Spaces Deck Preservation. Replace bent brow bracket. Forward Push Bar Repair. Main Engine and SSDG 5K/10K Maintenance. Perform sea trials after completion of repairs and full cure time of preservation. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the COR.
60DS1701 Availability:
Estimated July 2027 through September 2027
What/Where to Submit:
Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with " Maintenance, Repair, and Preservation of 60DS1701 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages.
1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)?
2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance.
3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)?
4. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA) issued by Naval Sea Systems Command (NAVSEA)?
5. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of 60DS1701 package?
When to Submit:
Responses are requested no later than 2:00PM PT, on 27 November 2026.
Notice Regarding Sources Sought:
This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement.
Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement.
Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.