Opportunity
SAM #70ZU0327Q62201Y00
U.S. Coast Guard vessel UHP blasting and surface-preparation services
Buyer
CG-SEA-C23
Posted
November 18, 2026
Respond By
December 28, 2026
Identifier
70ZU0327Q62201Y00
NAICS
336611
The U.S. Coast Guard Yard is seeking vessel surface-preparation services at its Baltimore facility. - Government buyer: U.S. Coast Guard (USCG), USCG Yard, office CG-SEA-C23, SSP. - OEMs and vendors: No OEMs, manufacturers, or vendors are named. - Requested services: Ultra-high-pressure (UHP) water jet blasting to remove coatings and contaminants from steel and aluminum vessel surfaces, plus mechanical and hand tooling where blasting is impractical. - Estimated annual UHP quantities: underwater body/freeboard/pedestals — 40,000 SF; superstructure/stack/mast — 15,000 SF; decks — 10,000 SF; and other bulkheads/exteriors — 4,000 SF. These estimates apply to the base period and each of four option periods. - Work includes vacuum-assisted tooling, containment, cleanup, wastewater and debris handling, and disposal at permitted facilities. Mechanical/hand tooling is estimated at 10% of requested blasted area for applicable superstructure and weather-deck work. - Key requirements: Meet WJ-2/L preparation standards; use SSPC-SP11 tooling where achievable, or SSPC-SP3/SP2 where needed. Maintain active SSPC QP1 certification and provide an on-site SSPC-C13-certified supervisor. Blast up to 3,000 SF per vessel per day; report for containment and staging within 24 hours of task-order receipt and commence coating removal within 72 hours of notification. - Applicable vessels: Coast Guard vessels and other designated vessels, including Foreign Military Sales and other government agency vessels; work may occur dry-docked or pier-side.
Description
The U.S. Coast Guard Yard, Baltimore, MD, has a requirement for Ultra High Pressure (UHP) Water Jet Blasting Services and supplementary vacuum-assisted mechanical/hand tooling services. Performance is required on various vessels that are scheduled for Yard Availabilities, both dry-docked and pier-side. The vessel lengths vary and include 327’ Eagle, 270' Medium Endurance Cutters, 225' Seagoing Buoy Tenders, 210' Medium Endurance Cutters, 175' Coastal Buoy Tender, 154’ Sentinel-Class, 140' Ice Breakers, 110' and 87' Patrol Boats, 75’ and 65' Tender/Barge configurations, as well as Foreign Military Sales and Other Government Agency (OGA) vessels.
UHP water jet blasting will be used to remove coatings and contaminants from designated U.S. Coast Guard vessel surfaces to achieve the WJ-2/L surface preparation standard on targeted vessel surfaces. Offerors must be experienced with UHP water jet blasting surfaces to National Association of Corrosion Engineers International (NACE)/The Society for Protective Coatings (SSPC) Surface Preparation Standard WJ-2/L.
Offerors must maintain an active Society for Protective Coatings (SSPC) QP1 certification and must provide, at a minimum, one SSPC-C13 certified person on-site for managing personnel while performing these services.