Opportunity

SAM #36C24527Q0076

VA Market Research for Patient-Movement Equipment and Bariatric Mobility Products

Buyer

VA Network Contracting Office 5

Posted

November 18, 2026

Respond By

December 02, 2026

Identifier

36C24527Q0076

NAICS

337127

The Department of Veterans Affairs is seeking market information on patient-movement equipment for emergency and contingency response; this is an RFI, not a solicitation or award. - Government buyer: Department of Veterans Affairs, Veterans Health Administration, Office of Emergency Management; Louis A. Johnson VA Medical Center Contracting Office (90C). Alison Klein is identified as the contact. - Requested equipment and estimated five-year quantities: - 40 standard folding, decontaminable rigid-pole litters (NSN 6530-01-380-7309; alternate part numbers 1-00047, 80760, 100047, MIL-L-16462, and 93-0010). - 134 oversized litters (NSN 6530-01-552-7708; alternate part numbers 60-0023, 6530NCM071439, and 3459). - 659 sets of two 33-inch litter stands (NSN 6530-01-523-3314; alternate part numbers 6530NCM041094, 04-1229, 60-0014, and STN-FIX). - 107 sets of three oversized litter stands (part number 60-0029). - 310 EL3000 NATO wheeled litter carriers (NSN 6530-01-591-9636; alternate part numbers 6530NCM115921, 21881, 2221030, and 9636). - 74 EL2000/EL3000 XL bariatric transport carts; no part number provided. - 96 bariatric wheelchairs; no part number provided. - OEMs and named products: No equipment manufacturer or OEM is expressly identified. EL2000, EL3000, Talon, Raven, T3, and Mede c are named product or compatibility references; the notice does not identify their manufacturers. No reseller or distributor is named. - Notable requirements: Products meeting or exceeding the stated characteristics may be proposed. Oversized litters require U.S. Air Force safe-to-fly certification and flame-retardant Nomex/Kevlar-blend fabric. Stands must be compatible with Talon, Raven, T3, and Mede c litters. Minimum load capacities are 1,200 pounds for standard stands, 1,600 pounds for oversized stands, 500 pounds for the NATO carrier, 600 pounds for bariatric carts, and 700 pounds for wheelchairs. Written warranty information is required, and freight is to be included in pricing, with delivery to the VA Office of Emergency Management in Kearneysville, West Virginia. - Additional procurement context: The EL3000 NATO wheeled litter carrier is identified as supported by a separate sole-source justification in the acquisition package. Quantities are estimates for the next five years; no contract performance period is specified.

Description

This RFI is solely for information and planning purposes and does not constitute a solicitation or obligation on the part of the Government. Per FAR 15.201(e), responses to this notice are not considered offers, shall not be used as a proposal, and cannot be accepted by the Government to form a binding contract. Neither unsolicited proposals nor any other kinds of offers will be considered in response to this notice. No evaluation letters and/or results will be issued to the respondents; however, the Government does reserve the right to contact any respondent and/or respondent reference to obtain additional information. At this time, no solicitation exists; therefore, please do not request a copy of the solicitation. Any resulting procurement action will be the subject of a separate, future announcement. The information is provided for discussion purposes and any potential strategy for this acquisition may change prior to any solicitation release. The acquisition strategy, evaluation methodology, contract type, and any other acquisition decisions are to be determined. Title of Requirement
Military type litters, stands and carts Background The Veterans Health Administration Office of Emergency Management supports Federal patient movement responsibilities under the National Disaster Medical System and the Department of Defense contingency mission. VHA maintains forty-eight Federal Coordinating Centers located across major cities in the United States and Puerto Rico, and those sites require standardized cache equipment to support reception, triage, and patient placement during disasters, exercises, and contingency operations. Required Equipment and Minimum Salient Characteristics The contractor shall furnish the following items or equal products that meet or exceed the minimum characteristics listed below.
1. Standard Folding Litter, Decontaminable, Rigid Pole NSN 6530-01-380-7309. Part #s multiple vendors 1-00047, 80760, 100047, MIL-L-16462, 100047 and 93-0010 Standard patient litter compatible with litter-mounting equipment used in medical evacuation vehicles and aircraft. Polypropylene cover. Aluminum poles and nylon handles. Adjustable overall length from 90 inches to at least 94.4 inches; nominal length 91.6 inches. 2. Oversized Litter (OSL) NSN 6530-01-552-7708. Part #s 60-0023, 6530NCM071439, 3459 Certified safe-to-fly by the U.S. Air Force and listed, or eligible for listing, on the applicable Safe-to-Fly approval list. Flame-retardant Nomex/Kevlar-blend fabric cover. Six stirrups. Bi-fold configuration with additional carrying loops. Minimum of six IV attachment points. Minimum of three patient securing straps. 3. Litter Stands (Set of 2) 33 Inch NSN 6530-01-523-3314. Part # 6530NCM041094, 04-1229, 60-0014, or STN-FIX Compatible with Talon, Raven, T3, and Mede c litters. Aluminum structure. Minimum capacity of 1,200 pounds. 4. Oversized Litter Stands (Set of 3) Part # 60-0029 Aluminum structure. Extended height of approximately 32 inches. Minimum capacity of 1,600 pounds. 5. EL3000 NATO Wheeled Litter Carrier Part # 6530NCM115921, 21881, 2221030, or 9636 NSN 6530-01-591-9636. Open dimensions approximately 158 cm x 62 cm x 86 cm. Closed dimensions approximately 52 cm x 62 cm x 84 cm. Powder-coated steel with cataphoresis paint process. Stainless steel fittings. Minimum capacity of 500 pounds. This item is identified in the draft as supported by a separate sole source justification within the acquisition package.
6. EL2000 and EL3000 XL Bariatric Transport Cart Green color. Open dimensions approximately 158 cm x 74 cm x 86 cm. Closed dimensions approximately 52 cm x 74 cm x 84 cm. Powder-coated steel with cataphoresis paint process. Stainless steel fittings. Minimum capacity of 600 pounds. 7. Bariatric Wheelchair Minimum capacity of 700 pounds. Seat dimensions approximately 24 inches by 18 inches. Adjustable seat height from 17.5 inches to 19.5 inches. Conventional desk-length arms. Two swing-away footrests per chair. Warranty The contractor shall provide written warranty information for all delivered items, including coverage terms, duration, and procedures for repair or replacement. Warranty documentation shall be submitted with the quotation and included with final delivery documentation.
Delivery Requirements All quoted prices shall include freight and shipping costs. Delivery shall be FOB Destination to the location or locations identified in the resulting award or order, and packaging shall conform to standard commercial practice to prevent transit damage.
Estimated quantities for the next five years Item # Manufacturer/Description/Part/Model Number* Qty Country of Origin 1 Standard Folding Litter, Decontaminable, Rigid Pole 40

2 Oversized Litter (OSL) 134

3 Litter Stands (Set of 2) 33 Inch 659

4 Oversized Litter Stands (Set of 3) 107

5 EL3000 NATO Wheeled Litter Carrier 310

6 EL2000 and EL3000 XL Bariatric Transport Cart 74

7 Bariatric Wheelchair 96

Delivery Location VA Office of Emergency Management 120 Commerce Circle Suites 700-900 Kearneysville WV 25430

RESPONSES:  Please include descriptive literature demonstrating the product meets or exceeds the brand name product specified above.  Please provide any product solution or configuration so long as they are equivalent to the brand name product. Responses can include any additional product that may be beneficial. These items must be clearly identified by brand name and part number.  PLEASE PROVIDE THE FOLLOWING ADDITIONAL INFORMATION: Full name and address of company DUNS number/ CAGE Code/ SAM UEI Business Size Manufacturer or Distributor  If distributor, provide full name, business size, and address of manufacturer.  Country of Origin designation for all products. Technical Literature that clearly shows product(s) are equivalent. Any additional product solution or configuration that would be beneficial to the functionality of the product line identified.   Authorized Distributor Letter Certified by OEM with a current date.  Although not required, vendors responding to this Sources Sought may also submit a Capabilities Statement. 

View original listing