Opportunity

SAM #N00019-27-RFPREQ-APM299-0678

NAVAIR seeks capabilities for MH-60S AMCM CSTRS obsolescence mitigation and sustainment

Buyer

Naval Air Systems Command

Posted

November 18, 2026

Respond By

December 04, 2026

Identifier

N00019-27-RFPREQ-APM299-0678

NAICS

334511

NAVAIR is seeking industry capabilities to address obsolescence and sustain the MH-60S Airborne Mine Countermeasures system. - Government buyer: Naval Air Systems Command (NAVAIR), supporting the PMA-299 MH-60 Multi-Mission Helicopter Program Office. - Opportunity: Obsolescence mitigation and sustainment for the MH-60S Airborne Mine Countermeasures Carriage, Stream, Tow and Recovery System (AMCM CSTRS). This is a capabilities-sourcing notice, not a request to purchase listed kits. - Existing systems identified: CSTRS Non-Tow Mission Kit (04101A01-03), CSTRS Tow Mission Kit (09412), and CSTRS Base Mission Kit (09754A01-00). These must remain compatible with current mission-kit hardware and operating systems. - Potential work: Sustainment, technical reach-back, software growth support, and backward-compatible solutions for obsolete Weapons Replaceable Assemblies and Shop Replaceable Assemblies. Work may also include aircraft and Government testing, Engineering Change Proposals, logistics updates, lifecycle estimates, flight-safety documentation, and Level III Technical Data Packages. - Key requirements: Meet the applicable Government-approved AMCM system specification and current U.S. Department of War cybersecurity requirements; support the Winch Maintenance Laptop Software and preserve compatibility with existing systems. - OEMs and vendors: No OEMs or vendors are named in the notice. - Submission information: The notice indicates an SBA set-aside and requests a capabilities statement of no more than 12 pages.

Description

Introduction

The Naval Air Systems Command (NAVAIR), in support of PMA-299 MH-60 Multi-Mission Helicopter Program Office, is seeking sources to support the Airborne Mine Countermeasure (AMCM) Carriage, Stream, Tow and Recovery System (CSTRS). The Contractor shall have the capability, experience, equipment, and facilities required to support ongoing obsolescence issues affecting CSTRS.

Program Background

AMCM was originally contracted in 2000 and executed in the DoD RDT&E funding under H2773, under which the first CSTRS prototypes were delivered to the U.S. Government. Carriage, Stream, Tow, and Recovery System (CSTRS) is part of the Airborne Mine Countermeasures (AMCM) weapons systems used on the MH-60S aircraft to allow the mounting, deployment, and recovery of Airborne Mine Neutralization System (AMNS) and Airborne Laser Mine Detection System (ALMDS).

The Government requires mitigation strategies to address obsolescence issues within the AMCM CSTRS Mission Kit in support of the following:

Provide sustainment support, system updates, and technical reach back for the existing AMCM CSTRS Mission Kits to combat rising obsolescence issues within the associated Weapons Replaceable Assemblies (WRAs) and Shop Replaceable Assemblies (SRAs). Proposed mitigation strategies and solutions shall be backwards compatible with all U.S. Navy MH-60S AMCM versions to include:

• CSTRS Non-Tow Mission Kit part number 04101A01-03

• CSTRS Tow Mission Kit part number 09412

• CSTRS Base Mission Kit part number 09754A01-00

The Contractor shall design and implement solutions to address obsolete WRAs and SRAs, as appropriate, to facilitate improved logistical support for the AMCM CSTRS Mission Kit. The AMCM Mission Kit is comprised of the CSTRS Base Mission Kit, CSTRS Base Structure Assembly, Tow Mission Kit, and the Non-Tow Mission Kit. The Contractor shall provide form, fit, and function replacements as possible solutions to facilitate maintaining inventory without requiring replacement of currently fleeted WRAs/SRAs. The Contractor shall support aircraft testing, deliver a full Technical Data Package for all upgraded parts, deliver an Engineering Change Proposal (ECP) for incorporation into the current system configuration, and update all applicable logistical support data. The Contractor shall ensure solutions comply with AMCM System Specification 233A172, or a superseding specification revision approved by the Government, if made available prior to any contract award.

Required Capabilities

1. Design solutions shall comply with the requirements of the MH-60S Airborne Mine Countermeasures (AMCM) System Specification, document number 233A172 Rev J, dated February 16, 2015, or its superseding Government-approved revision, whichever is available at potential contract award. This shall include all aspects of design, qualification, and testing of solutions.

2. Design solutions shall be backward compatible at the WRA/SRA level to AMCM CSTRS Mission Kit.

3. Design solutions shall provide the ability to support software growth capability for potential new software-driven modifications for the AMCM Winch Maintenance Laptop Software (WMLS).

4. Software updates, if needed, shall be backward compatible with current AMCM CSTRS Mission Kit configuration hardware and operating system.

5. Design solutions shall adhere to current U.S. Department of War cybersecurity requirements.

6. Provision of life cycle estimates for new components.

7. Provide documentation verifying solutions, when integrated into CSTRS, are safe for flight in support of U.S. Navy flight clearance processes.

8. Provide on-site and remote support to Government-conducted testing of final solutions.

9. Deliver to Government Level III Technical Data Packages for design solutions for this effort.

Submission Information

It is requested that interested businesses submit to the contracting office a brief capabilities statement package, no more than 12 pages in length, single-spaced, with a minimum 12-point font, demonstrating the ability to perform the tasks listed under Required Capabilities. This documentation must address, at a minimum, the following:

1. Company name; company address; company business size; and point-of-contact name, phone number, fax number, and email address.

2. Company profile, including number of employees, annual revenue history, office location(s), Unique Entity Identifier (UEI) number, and a statement regarding current small/large business status.

3. Prior/current corporate experience performing efforts of similar size and scope to the tasking described under Required Capabilities within the last three years, including contract numbers, contract values, Government point of contact with current telephone number, and a brief description of how the referenced contract related to those tasks.

4. Management approach to staffing this effort with qualified personnel.

5. Statement regarding capability to obtain the required industrial security clearances for personnel.

6. Company ability to begin performance upon contract award.

7. What type of work the company has performed in the past in support of the same or similar requirement.

8. Whether the company can or has managed a task of this nature; if so, provide details.

9. Whether the company can or has managed a team of subcontractors before; if so, cite contracts and teaming arrangement.

10. Specific technical skills the company possesses that ensure capability to perform the tasks.

11. If a small business, an explanation of the company’s ability to perform at least 50 percent of the tasking described in Required Capabilities.

12. Statement including current small/large business status and company profile, including number of employees, annual revenue history, office location, CAGE code, UEI number, etc.

13. Whether the respondent is a large business or qualifies as a Small, Small Disadvantaged, Small Disadvantaged Veteran-Owned Small Business, Women-Owned, 8(a), HUBZone, or Service-Disabled Veteran-Owned Small Business Concern.

14. Ability to meet requirements in the Facility and Safeguarding requirements.

Responses to this Sources Sought, including any capabilities statement, shall be electronically submitted via email to eric.j.richey.mil@us.navy.mil, in either Microsoft Word or Portable Document Format (PDF).

All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be protected. Information and materials submitted in response to this request will not be returned. Classified material shall not be submitted.

No phone calls will be accepted. All questions must be submitted via email. The Government is not committed or obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought.

The updated PMT PID for this opportunity is N00019-26-RFPREQ-APM299-0678.

View original listing