Opportunity

SAM #27-15-1001

Tinker AFB market research for two turnkey aerospace rotor balancing machines

Buyer

DLA Aviation

Posted

November 18, 2026

Respond By

December 19, 2026

Identifier

27-15-1001

NAICS

333517

DLA is conducting market research for two turnkey horizontal balancing machines for aerospace jet-engine rotors at Tinker Air Force Base. - Government buyer: Department of the Air Force, Air Force Sustainment Center, Oklahoma City-Air Logistics Complex, 76th Propulsion Maintenance Group (PMXG), Tinker AFB. - OEMs and vendors: No balancing-machine OEM or vendor is identified. Microsoft is named for the required Windows 11 LTSC control-computer operating system. - Machines requested: Two new hard-bearing, dual-drive horizontal balancing machines, including required tooling, installation, foundation work, qualification, certification, and acceptance testing. - Machine 1: 1 unit, SAE ARP 4048 Class 1000 or better; minimum 4,500-pound load capacity, 50 HP belt drive and end drive, and 106-inch maximum rotor length between bearing centers. - Machine 2: 1 unit, SAE ARP 4048 Class 3000 or better; minimum 9,500-pound load capacity, 50 HP belt drive, 75 HP end drive, and 106-inch maximum rotor length between bearing centers. Includes a compatible 100-inch-diameter clamshell part shroud. - Both machines require C600 safety/noise enclosures, permanent offline software licenses, industrial-network and cybersecurity capabilities, and calibration and certification to SAE AS8617 with reporting. - Machine-specific tooling includes ARP 1382 drive shafts, SAE 13-inch pedestal insert saddle pairs, pedestal roller assembly pairs, drive belts, and an ARP 4162 horizontal proving rotor for each machine. Machine 2 has one 500 ft-lb and one 1,000 ft-lb drive shaft. - Services and delivery: Turnkey delivery and installation at Building 3001, including rigging, labor, equipment, manuals, foundations, testing, qualification, and certification. The contractor removes and disposes of the existing foundation and excavates; the Government supplies 480 VAC power and 100 PSI compressed air within 30 feet of each machine. - Training: On-site classroom and hands-on training for 5 operators, at least five consecutive eight-hour workdays after satisfactory acceptance testing; provide English-language training aids for Government ownership. - Other notable requirements: Initial schedule and Acceptance Test Plan are due within 30 calendar days after award. A concrete foundation is expected, but an alternate approach meeting performance requirements may be proposed. The notice is market research, not a request for proposals.

Description

DLA Weapons Support Richmond is issuing this sources sought as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for two (2) hard bearing, dual-drive, horizontal balancing machines. for Tinker Air Force Base (AFB).  Potential sources must provide turn-key machine with: technical data (e.g. manuals, drawings), shipping/delivery, unloading and rigging, installation, foundation, IUID Tag, tooling, and training. The result of this market research will contribute to determining the method of procurement.

The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.  A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Submission Instructions: Interested parties should submit a response to this Sources Sought Notice before closing date & time.  All responses under this Sources Sought Notice must be emailed to AVN IPE Market Research at AVNIPEMarketResearch@dla.mil.  Email subject line must include ATTN: IPE Tracking Number 27-15-1001

Responses should be not exceed ten (10) one-sided 8.5 x 10 inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.

Draft copy of the purchase description is provided with this posting.   Attachment A: H6WP40 - Floor Plan Drawing - this drawing is not available at this time. .   Of specific note, please be able to comment on the following:

3.3.8 Balance System Control Computer - the requirement is for a Microsoft Windows 11 LTSC operating system

3.9.1.1 Foundation. - the current expected requirement is for the machines to be placed upon a concrete foundation to provide the dynamic stability needed for the weights being rotated.   If there is an alternate means to provide for performance required in the purchase description without needed to use a concrete foundation, please provide information to this posting on how this can be achieved.  

  

View original listing