Opportunity

Metropolitan Community College-Kansas City Publicpurchase #1031-27

One autoclave with installation, removal, and training for MCC Longview Campus

Posted

November 17, 2026

Respond By

December 08, 2026

Identifier

1031-27

NAICS

423450, 811310

Metropolitan Community College is seeking one installed autoclave for its Longview Campus. - Buyer: Metropolitan Community College (MCC), Longview Campus, Missouri. No sub-agency or purchasing office is identified. - OEMs and vendors: No OEMs, manufacturers, or vendors are named in the solicitation. - Product: One freestanding steam sterilizer (autoclave); no part number is provided. - Size: Exterior dimensions of 35–37 in. deep, 25–27 in. wide, and 73–75 in. tall; chamber at least 26 × 17.5 × 17.5 in. and at least 4.6 cu. ft. - Features: Two stainless-steel shelves; manual vertical sliding door with inherent safety design; programmable gravity and liquid cycles reaching 135°C; 30 kW carbon-steel steam generator with automatic descale blowdown and quench to drain below 140°F; ejector air removal; 208 V, 50/60 Hz, three-phase power; USB storage for up to 10,000 cycles; 8.4-in. SVGA color touchscreen; and thermal printer. - Services: Deliver and install the new autoclave, remove and dispose of the existing unit, and provide at least one training session. Installation is to use the existing drain, subject to confirming laboratory utilities and installation requirements. - Support and warranty: Bidders must provide local on-site repair and maintenance and be able to offer a maintenance contract for preventive maintenance and repairs. Required warranty coverage is at least one year of parts and labor, including on-site service for covered parts, and at least 15 years for the pressure vessel. Customer negligence is excluded from the all-inclusive warranty.

Description

Metropolitan Community College is seeking bids to provide one autoclave (steam sterilizer) for use at the MCC Longview Campus. The procurement includes delivery and installation of the new unit, removal and disposal of the existing unit, and at least one training session. The autoclave must meet the listed dimensional, operational, power, interface, and safety requirements, including a minimum 4.6 cu. ft. chamber and a 30 kW steam generator. Bidders must provide at least a one-year parts-and-labor warranty with on-site service and a 15-year pressure-vessel warranty; local repair and maintenance services and maintenance-contract options are also specified.

View original listing