Opportunity

SAM #N6274227RT4PP

NAVFAC Pacific Market Research for Type IV Polymeric Piles

Buyer

NAVFAC Pacific

Posted

November 18, 2026

Respond By

December 02, 2027

Identifier

N6274227RT4PP

NAICS

326199

NAVFAC Pacific is seeking manufacturer information on Type IV polymeric piles for a submarine pier project at Naval Base Guam. - Government buyer: Naval Facilities Engineering Systems Command, Pacific (NAVFAC Pacific); project is the FY27 MCON Project P-676 Polaris Point Submarine Pier at Naval Base Guam. - OEM/reference product: Tangent Technologies, LLC is identified as the manufacturer of the reference piles; qualified equivalents may be considered. - Product requested: Type IV polymeric piles, 16-inch outer diameter (±5%); quantity and part number are not specified. - Key performance and material requirements: - Allowable moment capacity: 278 kip-feet; allowable shear capacity: 45.0 kip; flexural modulus: 2.7×10⁹ lb-in² (±10%). - Specific gravity: 63 lb/ft³; skin density: 60 lb/ft³; core density: 48 lb/ft³ (each ±5%). - Water absorption below 0.1% at 24 hours; no break in the brittleness test; Shore D hardness of 60 (±10%); no hardness change after 500 hours of UV exposure. - Flame spread below 200 and abrasion resistance below 0.5 g. - For piles reactive to seawater, an HDPE sleeve or abrasion-resistant polymer encasement at least ½ inch thick may be proposed. - Notable qualification: Responses are sought from manufacturers with direct ownership of the production line or manufacturing rights to a qualified equivalent. Distributors, resellers, or brokers without those rights will not be considered responsive. - The notice is market research, not a request for proposals, quotes, or bids; detailed technical data is requested for evaluation.

Description

Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Pacific (NAVFAC Pacific) is conducting market research in accordance with FAR Part 10 to identify potential manufacturers capable of producing type IV polymeric piles that have equal performance and listing/approval requirements as the type IV polymeric piles that are manufactured by Tangent Technologies, LLC.  Responses from third-party distributors, pass through resellers, or supply brokers who do not directly own the production line or manufacturing rights to a qualified equivalent product will not be considered responsive to this market survey. 

FY27 MCON Project P-676 Polaris Point Submarine Pier, located Naval Base Guam requires type IV polymeric piles that demonstrate the following salient characteristics: 

Performance Characteristics:

Structural Outer Dimensions/Diameter: 16 inch, N/A, +/- 5 percent Allowable Moment Capacity *: 278 kip – feet, ASTM D7258 Flexural Modulus (EI): 2.7x109 lb-in2, ASTM D6109, +/- 10 percent Allowable Shear Capacity *: 45.0 kip, ASTM D7258

*   A factor of safety of 2.0 is used to convert allowable to ultimate for flexure and 3.0 used to convert allowable to ultimate for shear.

Physical Properties:

Specific Gravity: ASTM D792, 63 pounds per cubic foot +/- 5 percent. Pile Skin Density: ASTM D792, 60 pounds per cubic foot +/- 5 percent. Pile Core Density: ASTM D792, 48 pounds per cubic foot +/- 5 percent. Water Absorption: ASTM D570, less than 0.1 percent at 24 hours. Brittleness: ASTM D746, no break. Hardness (Shore D): ASTM D2240, 60 +/- 10 percent. Ultraviolet Effect on Hardness: ASTM D4329, no change after 500 hours of exposure. Flame Spread Rating: ASTM E84, less than 200. Abrasion Resistance: ASTM D4060, less than 0.5g.  If the pile material is reactive to seawater, alternative can be provided where the pile is furnished with an HDPE sleeve encasement or abrasion resistance polymer, with a minimum thickness of ½ inch. 

This is not a request for proposals, quotes, or an invitation for bid. The intent of this notice is to identify potential alternative type IV polymeric piles that will satisfy agency requirements. To be considered, please submit detailed technical data in order for the Government to conduct a comprehensive evaluation of your product to ensure compatibility with the existing system. In accordance with FAR 15.101(c)(2), a response to this notice is not an offer and cannot be accepted by the Government to form a binding contract. The responder is solely responsible for the information it submits and any associated costs. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit company brochures. Please submit complete information via email to Ms. Michelle Gopwani-Lee via electronic mail at michelle.m.gopwani-lee.civ@us.navy.mil no later than 02 December 2026 at 12:30 p.m. H.S.T.  Information received after the due date/time will not be considered. Any information provided to the Government in response to this RFI will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately.

View original listing