Opportunity

SAM #70Z08527RIBCT270001087

FY27 USCGC HICKORY drydock maintenance and repair market research

Buyer

CG-SEA-C22

Posted

November 17, 2026

Respond By

December 07, 2026

Identifier

70Z08527RIBCT270001087

NAICS

336611

The U.S. Coast Guard is conducting market research for FY27 drydock maintenance of the USCGC HICKORY (WLB 212). - Government buyer: U.S. Coast Guard, Surface Forces Logistics Center, Alameda, California; the vessel is homeported in Guam. - Requirement: Contractor-provided labor, facilities, materials, equipment, supplies, and support for approximately 110 drydock work items. - Scope includes hull and structural inspections, ultrasonic testing, steel and weld repairs, preservation, cathodic protection, tank cleaning, propulsion shafting and propeller work, rudder and thruster maintenance, piping and ventilation work, machinery and deck-equipment servicing, and drydock and sea-trial support. - Named equipment includes a Welin Lambie Dual Point Davit TWPIV 5.0B and an Appleton EB600-60-40 buoy crane. - OEMs named: Welin Lambie and Appleton. No other OEMs or vendors are identified in the provided notice. - Notable requirements: Work is to be performed at the contractor’s facility and is subject to a Coast Guard District 14/Hawaii geographical restriction. - Notice status: Sources-sought market research; it is not a request for proposals or quotations.

Description

This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees.

REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC HICKORY (WLB 212). USCGC HICKORY (WLR-WLB 212) DRYDOCK AVAILABILITY FY27.

ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. GEOGRAPHICAL RESTRICTION: YES, SUBJECT TO U.S COAST GUARD DISTRICT 14 - HAWAII MILITARY CONSIDERATION MEMORANDUM PLACE OF PERFORMANCE: Contractor’s Facility

DESCRIPTION OF WORK: This requirement is for the contractor to provide all necessary facilities, materials, equipment, personnel, and other such things necessary to perform Dry-dock repairs to the U.S. Coast Guard Cutter (USCGC) HICKORY (WLB 212). This vessel’s homeport is Coast Guard Station Apra Harbor Guam 96915. All work is to be performed at the Contractor’s facility. The required performance period is 84 days. The performance period is 15 July 2027 – 07 October 2027 to accommodate Coast Guard cutter operational needs. Description: This Dry Dock will consist of approximately one hundred and ten (110) work items, not limited to: hull plating ultrasonic testing, underwater body preserve, propeller removal and inspect, propulsion shaft remove, inspect and reinstall, rudders remove, inspect, reinstall and preserve, construction deck 100% preserve, tanks clean and inspect, and boat davit inspect.

ITEMDESCRIPTION D-001Fire Prevention Requirements «TYPE» D-002Hull Plating, U/W Body, Inspect D-003Hull Plating, U/W Body, Ultrasonic Testing O-004U/W Body, Preserve, 100 percent O-005U/W Body, Preserve, Partial, Condition A O-006U/W Body, Preserve, Partial, Condition B O-007U/W Body, Preserve, Partial, Condition C D-008Hull Plating, Freeboard, Ultrasonic Testing O-009Hull Plating Freeboard, Preserve, 100 Percent O-010Hull Plating Freeboard, Preserve, Partial O-011Hull Plating Freeboard (Buoy Port Areas), Preserve O-012Hull and Structural Plating, General, 10.2 lbs. Steel, Renew O-013Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew O-014Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew O-015Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew O-016Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew O-017Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew O-018Hull And Structural Plating, General, Cracked Steel Welds, Repairs O-019Hull and Structural Plating, General, Degraded Weld, Steel, Repair D-020Cathodic Protection, Zinc Anodes, Renew D-021Impressed Current, Cathodic Protection System and Reference Cell Anodes, Renew D-022Impressed Current Cathodic Protection System, Inspect and Maintain D-023Appendages, U/W, Leak Test O-024Appendages, U/W, Internal, Preserve O-025Chain Locker, Preserve, 100 Percent D-026Voids, Non-Accessible, Leak Test O-027Voids, Non-Accessible, Internal Surfaces, Preserve O-028Accessible Voids, Preserve, 100 Percent O-029Accessible Void(s), Preserve, Partial D-030Propulsion Shaft Fairwaters And Rope Guards, Inspect D-031Grey Water Holding Tanks, Clean and Inspect O-032Tanks, Grey Water Holding, Preserve, 100 Percent O-033Tanks, Grey Water Holding, Preserve, Partial D-034Sewage Holding Tanks, Clean and Inspect O-035Tanks (Sewage Holding), Preserve, 100 percent O-036Tanks (Sewage Holding), Preserve, Partial D-037Sewage Piping, Clean and Flush D-038Tanks, Potable Water, Clean and Inspect O-039Tanks, Potable Water Preserve, 100 Percent O-040Tanks, Potable Water, Preserve, Partial D-041Tanks, Ballast, Clean and Inspect O-042Tanks, Ballast, Preserve, 100 Percent O-043Tanks, Ballast, Preserve, Partial D-044Tanks, MP Fuel Service, Clean and Inspect O-045Tanks, MP Fuel Service, Preserve, Partial D-046Propulsion Shafting; Remove, Inspect, and Reinstall D-047Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal D-048Propulsion Shaft Bearings, External, Check Clearances O-049Propulsion Tail Shaft Sleeve, Skim Cut O-050Propulsion Shaft Bearing, Stave Renewal O-051Stern Tube Interior Surfaces, Preserve, 100 Percent D-052Controllable Pitch Propellers, Clean and Inspect D-053Controllable Pitch Propeller, System Maintenance, Perform D-054Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform D-055Controllable Pitch Propeller Hub, Remove and Reinstall D-056Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean D-057Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean D-058Vent Ducts, Engine And Motor Room, All, Commercial Cleaning D-059Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning D-060Vent Ducts, Laundry Exhaust, Commercial Cleaning D-061Vent Ducts, All Other, Commercial Cleaning O-062Sea Valves and Waster Pieces, Overhaul Or Renew O-063Sea Strainers, Duplex, All Sizes, Overhaul O-064Sea Strainers, Simplex, All Sizes, Clean and Inspect D-065Sea Strainers, All Sizes, Renew D-066Sea Bay, Clean and Inspect O-067Sea Bay, Preserve 100% D-068Compressed Air Receivers and System Valves, All, Clean, Inspect, Hydro and Lift D-069Rudder, Inspect And Repair O-070Rudder Bearings, Renewal O-071Rudders, Preserve, 100 Percent D-072Rudder Stock Bearings, Check Clearances D-073Rudder and Rudder Stock, Remove and Inspect O-074Thruster Units (Bow And Stern), Overhaul O-075Thruster Unit Bearings, Renew D-076Hydraulically Operated Cargo Hatch, Inspect and Service D-077Hull Fittings (Mooring and Towing), Inspect and Test D-078Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test D-079Hydraulic Chain Stoppers, Inspect and Service D-080Mechanical Chain Stoppers, Inspect and Service D-081Crossdeck Winches, Inspect and Service D-082Hydraulic Inhaul Winch, Inspect And Service D-083Anchor Windlass, Inspect and Service D-084Anchor Chains and Ground Tackle, Inspect and Repair D-085Warping Capstan, Inspect and Service D-086Single Point Davit, Inspect and Service O-087Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul D-088Decks – Exterior (Buoy or Construction Deck), Preserve 100% D-089Heat Exchangers, Clean, Inspect And Hydro D-090Fathometer Transducer, General Maintenance D-091Fixed CO2 FF Bottles, Inspect and Hydrostatic Test O-092Superstructure, Preserve, Partial D-093Drydock D-094Temporary Services, Provide - Cutter D-095Sea Trial Performance, Support, Provide D-096Watertight Doors and Scuttles, External, Renew D-097Anchor Chain and Ground Tackle, Preserve D-098SORS Cargo Rail Remove D-099Buoy Crane, Appleton EB600-60-40, Inspect and Service D-100Deck Covering (Interior Wet/Dry), Renew D-101Port Pilothouse Window, Renew D-102Pilot House Windows and Frame, Repair and Reseal D-103Piping Insulation, Renew D-104Incinerator Room Plating, Repair D-105Pilot House Weathertight Door, Renew D-106Sewage Piping, Renew D-107Fly Bridge Kickpipes, Renew D-108Deck Covering, Carpet Remove, Renew D-109Shower Pan, Inspect and Renew D-110Decks - Potable Water Pump Room and Passageway, Preserve

ANTICIPATED PERIOD OF PERFORMANCE: 15 July 2027 through 07 October 2027 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 84 calendar day period of performance.

SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Sam.Gov announcement with the following information/documentation: Ou Saephanh @ Ou.T.Saephanh@uscg.mil and Sandra Martinez @ Sandra.A.Martinez@uscg.mil no later than 8:00 AM Pacific Time 17 December 2026, with all of the following information/documentation:

Name of Company, Address and DUNS Number. Point of Contact and Phone Number. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are “economically disadvantaged”, and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. Statement of Proposal Submission: Statement that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.

SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220.

Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition.

View original listing