Opportunity
University of Missouri Ionwave #27-0051 Addendum 1
Turnkey manipulator-based hot cell system for the Missouri S&T Research Reactor
Posted
November 06, 2026
Respond By
November 19, 2026
Identifier
27-0051 Addendum 1
NAICS
333998, 332999, 423490
The University of Missouri is seeking one turnkey hot cell system for the Missouri S&T Research Reactor’s training and nuclear-material processing work. - Buyer: University of Missouri System, through Missouri S&T’s Department of Nuclear Engineering and Radiation Science and the Missouri S&T Research Reactor (MSTR), in Rolla, Missouri. - OEM named: Wälischmiller (also rendered “Walischmiller” in the materials). Its VNE100S servo-driven telemanipulator is identified as acceptable; LiRob is mentioned as an example. Neither model is mandatory, and no other OEMs or vendors are named in the source materials. - Primary procurement: One complete, standalone manipulator-based hot cell system for instruction, small-scale processing of neutron-activated solid or foil targets, and basic post-irradiation examination. No fixed part number is specified. - Core configuration and quantities: One system, including a main work chamber with minimum internal dimensions of 3.5 ft × 2.5 ft × 3 ft (larger preferred), manipulators capable of lifting at least 10 lb throughout the work area, shielding, viewing windows, access doors, safety systems, controls/HMI, lighting, and ventilation. Seven degrees of freedom is strongly preferred; at least six degrees of freedom is required, with more limited designs considered if justified. - Transfer and storage: Provide at least one additional transfer chamber or equivalent, separate interfaces for pneumatic transfer and a shielded transfer cask, and a more heavily shielded storage location. Include provisions for two or more 1.5-inch pneumatic rabbit systems, which the University will supply and install. A shielded pig or small transfer cask may be offered optionally. - Facility and operating requirements: Maximum external envelope of 10.5 ft high × 7 ft wide × 10 ft long; floor loading should not exceed 200 psf unless approved. The cell must support negative-pressure operation, HEPA-filtered inlet and exhaust air, and provisions for activated-carbon or silver-zeolite filtration. Inerting is preferred or may be provisioned for a future upgrade. Accommodate internal radiation monitoring for an anticipated field of approximately 100 kR/hr and electrical service compatible with 208/120 VAC or 480/277 VAC. - Materials and radiation exposure: A 316L stainless-steel interior liner is acceptable; PTFE is not. Non-radiation-hardened equipment may be proposed, with estimated exposed-hardware service life based on 0.5 Ci of Co-60. A blanket 1 MGy tolerance is not required. - Options: Saturated-steam autoclave for vials, additional glove portals, tele-pliers and other manipulator accessories, internal cameras and data-transfer functions, and internal transfer doors. - Services and lifecycle: Include delivery, placement, installation, commissioning, factory and site acceptance testing (FAT/SAT), documentation, and operator training. The system must have a minimum ten-year design life, a three-year warranty, at least one year of post-installation support and maintenance, and parts and consumables support for ten years after commissioning. - Estimated contract value: Approximately $500,000–$2,000,000; the source materials provide no stated budget.
Description
The University of Missouri requests proposals for furnishing and delivery of a manipulator-based hot cell for the Missouri S&T Reactor. The standalone system is intended for training, material processing, and basic post-irradiation examination, and includes the equipment and systems required for operation, such as shielding, windows, manipulators, access doors, and safety equipment. The scope includes installation, commissioning, and factory and site acceptance testing; the bid must also provide technical compliance documentation and a completed compliance matrix. Proposals must be submitted through the University of Missouri System electronic bidding platform by November 19, 2026, at 2:00 PM CT.