Opportunity

Iowa State University Ionwave #RFP-1001539

Desktop Scanning Electron Microscope System with Installation and Training

Posted

November 16, 2026

Respond By

November 30, 2026

Identifier

RFP-1001539

NAICS

423490

Iowa State University is seeking one complete desktop scanning electron microscope (SEM) system for materials characterization and elemental analysis. - Buyer: Iowa State University of Science and Technology; no sub-agency or purchasing office is identified. - OEMs and vendors: No manufacturer, OEM, reseller, or vendor is named in the solicitation. - Requested equipment: One complete, operational desktop SEM, including workstation, monitor, keyboard, mouse, required software, freight, installation, and training. No part number is specified. - Sample capacity of at least 100 × 100 mm; accelerating voltage of approximately 2–20 kV or greater; motorized X-Y stage with at least 100 × 100 mm travel. - Integrated chamber or navigation camera; backscattered-electron (BSE) and secondary-electron (SE) imaging; integrated energy-dispersive spectroscopy (EDS) for qualitative and quantitative elemental analysis and elemental mapping. - Software must support image acquisition and analysis, elemental identification, and elemental mapping. - Preferred capabilities: Line scanning, magnification above 100,000, real-time elemental mapping, image stitching and large-area mapping, automated phase mapping or compositional clustering, an upgrade path for automated particle analysis, long-life electron-source technology, and sample-preparation accessories such as conductive coating solutions. - Services and support: Installation and training are part of the requested system quotation. Bidders should describe warranty, technical support, delivery lead time, and installation/training arrangements. Pricing for optional preventive maintenance or service coverage for 12 months beyond the standard warranty may also be provided.

Description

Iowa State University of Science and Technology seeks quotations for a desktop scanning electron microscope system for microstructural characterization and elemental analysis of materials produced through various manufacturing processes. The requested system must be complete and fully operational, including installation, training, and all components needed to meet the stated requirements. Specifications include sample accommodation, imaging capabilities, integrated energy-dispersive spectroscopy, and a workstation with analysis software. Responses must be submitted online through ISUBid.

View original listing