Opportunity

CanadaBuys #26-58205

NRC Battery Thermal-Property Measurement System

Posted

November 16, 2026

Respond By

December 11, 2026

Identifier

26-58205

NAICS

334516, 423490, 811210

The National Research Council of Canada needs a turnkey thermal-property measurement system for rechargeable battery research. - Government buyer: National Research Council of Canada (NRC), Automotive and Surface Transportation (AST) sector; the notice identifies Daniel Rusthoven in the Procuring Office. - OEMs and vendors: No manufacturer, OEM, brand, or supplier is named in the opportunity. - Main product: One modular system to directly and simultaneously measure thermal conductivity, thermal diffusivity, and specific heat capacity in battery cells, materials, and assemblies. It must support non-destructive testing of isotropic and anisotropic samples, including pouch, prismatic, and cylindrical cells. - System components and performance: Transient measurement modules for 3D bulk, 3D anisotropic, slab, rod/cylinder, and thin-film samples; multichannel operation; battery fixtures; software, sensors, accessories, and a climate chamber. Measurement modules must collectively cover at least 0.006–1,750 W/mK, with conductivity accuracy of 5% or better and repeatability of 2% or better. The chamber must operate from -45°C to +120°C, with setpoint accuracy within ±1°C; system temperature control must support -50°C to +130°C. Relevant methods must meet ISO 22007-2 and ASTM E3088-25 where applicable. - Battery formats and setup: Fixtures must support pouch and prismatic cells in specified dimensions, plus cylindrical formats 18650, 21700, 26650, 4680, 4695, and 46120. Fixtures must enable symmetric and asymmetric testing from at least -45°C to +100°C. The chamber must have internal dimensions of at least 50 × 48 × 55 cm and a cable pass-through. Components must accept specified 60 Hz power and have applicable Canadian electrical certification. - Included documentation and supplies: One English soft-copy documentation set, including operating and installation information, technical specifications, recommended spare-parts list, contact information, and electrical schematic; PDF copies are to be provided on a USB key. Include consumables and common wear components for the first year. - Required services: Delivery, installation, integration, commissioning, performance verification, and acceptance testing; on-site training in Ottawa for up to four staff for at least two consecutive working days; and a fixed-price one-year extended warranty. The warranty includes parts, labor, shipping, remote support, and on-site service when remote resolution is unsuccessful. - Delivery and coverage: Delivery is required within 16 weeks after order placement, and commissioning within six months of initial delivery. The standard one-year manufacturer warranty begins at commissioning and acceptance, followed by the one-year extended warranty, for two continuous years of coverage. - Estimated value: Approximately $150,000–$500,000 USD; the procurement documents do not state a contract value.

Description

The National Research Council of Canada requires a thermophysical analysis system for direct, simultaneous measurement of thermal conductivity, thermal diffusivity, and specific heat capacity in rechargeable battery systems and their constituent materials. The system must use transient thermal measurement methodology, such as Transient Plane Source (TPS) or equivalent, to enable non-destructive, direction-resolved characterization of pouch, prismatic, and cylindrical cells. It will support measurement of isotropic and anisotropic properties under controlled temperatures from sub-ambient to elevated conditions. The solicitation seeks proposals for supply of this system; selection is based on the lowest-priced responsive offer.

View original listing