Opportunity
CanadaBuys #26-58217
Turnkey motor-drive system for NRC Wheel Bearing and Brake facility
Posted
November 16, 2026
Respond By
December 11, 2026
Identifier
26-58217
NAICS
333612, 333613
The National Research Council of Canada is seeking a turnkey motor-drive upgrade for its Wheel Bearing and Brake test facility. - Buyer: National Research Council of Canada (NRC), including its Advanced Structures and Materials / Advanced Structures and Transportation (AST) branch; procurement office details include the NRC Procuring Office and Bureau des acquisitions. Frederik Beauchamp is named in the detailed requirement. - OEMs and vendors: No manufacturers, OEMs, or suppliers are named in the solicitation. - Main procurement: One integrated motor-drive system, including a direct-coupled motor, regenerative variable frequency drive (VFD), encoder feedback, controls, software and licenses, documentation, accessories, and required cabling. No part numbers are specified. - Performance requirements: At least 7.17 kNm continuous torque to 372 rpm, at least 279 kW continuous power through 1,161 rpm, and 10.75 kNm overload torque for 60 seconds every 600 seconds. The drive must regenerate full rated power continuously and operate on 540–660 V, three-phase, 60 Hz power without derating. No gearbox, belt, or chain drive is permitted. - Optional equipment: Bearing resistance temperature detectors (RTDs) and drive monitoring provision, one additional wired and/or wireless control station, and a braking chopper and resistor. The optional braking equipment must absorb 9.9 MJ during an emergency deceleration from 1,161 rpm to a stop in under 60 seconds. - Services and delivery: On-site mechanical installation, commissioning, configuration, functional and acceptance testing, plus one day of training for up to six NRC personnel. The contractor supplies installation drawings and instructions and required cabling other than incoming and motor power cables supplied by NRC. - Warranty: At least 12 months after successful commissioning and NRC acceptance, covering parts, labor, technical support, and defective-component replacement.
Description
The National Research Council of Canada requires one motor for its Wheel Bearing and Brake facility. The procurement includes supply, delivery, and integration of a complete motor drive system, on-site mechanical installation, commissioning, configuration, and testing, as well as on-site training for up to six NRC personnel. All deliverables must be received by March 31, 2027. Only Canadian suppliers and suppliers from applicable trading partners are eligible, and the stated selection basis is lowest price.