Opportunity

SAM #W912DS27S0007

Restricted shipyard repair services for the DCV Hayward

Buyer

USACE Environmental Design and Support Team

Posted

November 16, 2026

Respond By

December 01, 2026

Identifier

W912DS27S0007

NAICS

336611

USACE New York District plans a geographically restricted shipyard contract to repair the Drift Collection Vessel (DCV) Hayward. - Buyer and contract: U.S. Army Corps of Engineers (USACE), New York District; intended as a fixed-price contract under Other Than Full and Open Competition. - Work required: Drydock one vessel; clean and paint its hull; assist with required American Bureau of Shipping (ABS) and U.S. Coast Guard (USCG) inspections; and perform miscellaneous modifications and repairs. The shipyard must provide the labor, materials, equipment, tools, utilities, and other items needed to complete the work. - Vessel: All-welded-steel monohull, 124 feet long, with a 38-foot molded breadth and 12-foot-9-inch molded depth. - Location restriction: The shipyard must be reachable within the vessel’s safe navigation limits: up to 500 nautical miles from the Atlantic project boundary, 200 nautical miles from Long Island Sound, or 140 nautical miles from the Hudson River boundary, subject to specified coastwise routing and round-trip distance requirements. - Notice status: This is a notice of intent, not a formal solicitation or request for proposal. No OEM, vendor, part number, or product quantity is identified.

Description

Notice of Intent to Restrict Competition for Repairs to the DCV Hayward

The U.S. Army Corps of Engineers New York District intends to solicit a fixed price contract for repairs to the Drift Collection Vessel (DCV) Hayward. The solicitation will be restricted to shipyards within the boundary deemed safely navigable to reach by the DCV Hayward.

Per DCV Hayward COI states that Routes Permitted is “Lakes, Bays, and Sounds. Plus, Limited Coastwise” Routes permitted is determined by the size, shape, and stability of the vessel. The Work Performance Location shall be limited to the area within the Project Boundary labeled “Limit of Drift Removal Project,” as shown on the project map “New York Harbor NY and NJ Collection and Removal of Drift,” dated 30 September 1986, plus extended locations outside of this Project Boundary, deemed safely navigable to reach by DCV Hayward as follows:

No further than a 500 nautical mile (round trip) voyage via navigable waters beginning and ending at the South Project Boundary in the Atlantic Ocean (Atlantic Highlands).  Any coastwise Atlantic Ocean transit shall not extend past the entrance to Delaware Bay.  Any transit route past this point must be via the Delaware River, C&D Canal, or Chesapeake Bay. 

No further than a 200 nautical mile (round trip) voyage via navigable waters beginning and ending at the East Project Boundary in Long Island Sound (Port Chester).

No further than a 140 nautical mile (round trip) voyage via navigable waters beginning and ending at the North Project Boundary in the Hudson River (Tappan Zee).

Description of Work

a. The work consists of furnishing all labor, materials, fittings, equipment, tools, power, heat, water, etc., and performing all work on U.S. Drift Collection Vessel "Hayward" specified herein.  The principal dimensions and physical data for the vessel are shown below:

GENERAL DESCRIPTION

Length Overall............................................................... 124’-0"

Breadth, Molded............................................................. 38’‑0"

Depth, Molded................................................................ 12’-9”

Material…………………………………………………All Welded Steel

Registered (Gross).......................................................... 385 tons

Displacement, light........................................................ 390.4 Short tons

Propellers (2).................................................................. 78"Dx61"P, 4 blade

Draft, light...................................................................... 7’-0”

Hull Form/Special Features........................................... Monohull/Keel cooler

ABS I.D. No................................................................... 7500277

b. The major work scope includes drydocking the vessel, cleaning and painting the hull, assisting with ABS and USCG required inspections, and miscellaneous modifications and repairs in accordance with these specifications. 

c. This is not a formal solicitation or request for proposal. This notice is to give notice of the Government’s intent to solicit this work under Other Than Full and Open Competition.

View original listing