Opportunity
SAM #W519TC-27-Q-ICUP
MJU-75B Coined-Point Impulse Cartridge Cups
Buyer
W6QK ACC-RI
Posted
November 16, 2026
Respond By
November 25, 2026
Identifier
W519TC-27-Q-ICUP
NAICS
331318, 332993
The U.S. Army is seeking quotes for MJU-75B coined-point impulse cartridge cups for the Crane Army Ammunition Activity. - Buyer: U.S. Department of the Army, through Army Contracting Command–Rock Island (ACC-RI), for Crane Army Ammunition Activity. - OEMs and vendors: No manufacturer, OEM, or vendor is identified in the notice. - Products requested: 10 MJU-75B impulse cartridge cups, coined point, for first-article testing; 28,215 MJU-75B cups for production. - Requirements: Provide material certification or a certificate of conformance. Shipments must be lot-numbered and packaged to ASTM D 3951 requirements. - Delivery: FOB Destination to Crane, Indiana. First-article units are due six weeks after award; production shipments follow first-article acceptance in two staged deliveries.
Description
This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested and a formal solicitation will NOT be issued.
This is a Request for Quotation (RFQ) using FAR RFO Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC27QICUP for the Impulse Cartridge Cup, Coined Point. The technical specifications are found in DWG 201719311 Rev – Blank Point Impulse Cartridge Cup, DWG 201719312 Rev – Coined Point Impulse Cartridge Cup, and DWG 201719314 Rev – Coining Tooling.
The incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. The pertaining FAR RFO and Defense FAR Supplement (DFARS) provisions/ clauses apply to this RFQ and resulting award and are found in Attachment 007 – Provisions and Clauses.
The NAICS code for this procurement is 331318 (Other Aluminum Rolling, Drawing, & Extruding). The small business size standard for this NAICS is 750 employees. The Product Service Code is 1377 (Ammunition & Explosives – Cartridge & Propellant Actuated Devises & Components).
Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/.
ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL
DESCRIPTION OF REQUIREMENT
CLIN 0001: First Article Testing (FAT) Impulse Cartridge Cup, Coined Point
Quantity: 10 each
CLIN 0002: Production Qty – Impulse Cartridge Cup, Coined Point
Quantity: 28,215 each
In accordance with Attachment 0001 – Purchase Description MJU-75B Impulse Cartridge Cup dated 28OCT2026, Attachment 0002 - DWG 201719311 Rev – Blank Point Impulse Cartridge Cup, Attachment 0003 – DWG 201719312 Rev – Coined Point Impulse Cartridge Cup, and Attachment 0004 – DWG 201719314 Rev – Coining Tooling.
A Material Certification/ Certificate of Conformance is required for each item for delivery.
BOL/ Shipping information must contain the applicable contract number and applicable PR document number.
TYPE OF ACQUISITION AND CONTRACT
This acquisition is issued as Full and Open. Award will be made using Low Price Technically Acceptable (LPTA) Source Selection procedures resulting in a single award Firm Fixed Price Purchase Order.
DELIVERY AND LOCATION
CLIN Description Suggested Lead Time
0001 Impulse Cartridge Cup, Coined Point; 10 each 6 Weeks After Award
0002 Production Qty: Impulse Cartridge Cup, Coined Point; 28,215 each 11 Weeks After FAT Acceptance
NOTE: A shipment of 14,000 each delivered 11 weeks after FAT acceptance followed by a second shipment of 14,215 each delivered 22 weeks after FAT, until a quantity of 28,215 each has been shipped/ delivered. Early deliveries of the FAT and/ or Production Quantity are acceptable at no additional cost to the Government.
Delivery will be FOB Destination at the following address:
Crane Army Ammunition Activity
Building 148
300 Highway 361
Crane, IN 47522-5001
CRANE ARMY AMMUNITION ACTIVITY DELIVERY INSTRUCTIONS
CAAA receiving hours are 0700-1430, Mon – Thurs BY APPOINTMENT ONLY; Includes Inert & Freight All Kind (FAK). Appointments shall be made via Carrier Appointment System (CAS). Carriers without access to the CAS System, call (812)854-2199 or (812)854-2339, 48 hours prior to delivery for appointment. Failure to follow the protocol stated herein and/or obtain a scheduled delivery time prior to delivery may result in the truck being turned away.
PACKAGING AND MARKING REQUIREMENTS
Preservation, Packaging, and Packing shall be in accordance with ASTM D 3951 (Commercial Packaging). Each shipment shall be marked with an identifiable Lot Number. This Lot Number shall be created in accordance with Attachment 0005. The Lot Number shall also be included on the Material Certification/ Certificate of Conformance.
INSPECTION AND ACCEPTANCE
Inspection and Acceptance will be completed by CAAA. Acceptance will be based on Kind, Count, and Condition.
QUOTE SUBMISSION REQUIREMENTS
Offerors shall submit the following in response to this solicitation:
Price – Offerors must submit Completed Pricing Sheet at Attachment 0006. All yellow-highlighted sections shall be completed. Prices shall be stated to 2 decimal places.
USE OF ARTIFICIAL INTELLIGENCE (AI) TOOLS IN PROPOSAL EVALUATION
Use of Al tools in Support of Evaluations: The Government may employ Al as a tool to assist in the analysis and review of offeror proposals. Al tools may be used to support tasks such as summarizing proposal content, identifying compliance with request for task order proposal/ solicitation requirements, and highlighting areas of potential strength, weakness, or risk.
Maintaining Inherently Governmental Functions: Notwithstanding the use of Al tools to support the evaluation process, all final evaluation judgements, including the assignment or assessment of adjectival ratings, best value determinations, and source selection decisions, will be made exclusively by duly appointed Government personnel. The Government retains sole responsibility for all inherently governmental functions and will not delegate decision making authority to any Al tool.
Offeror Confidentiality and Data Protection: The Al tools utilized by the Government will be employed in a manner consistent with applicable regulations that govern the protection of proprietary and source selection sensitive information. The Al tool will be an output-only system. Any generated report data is not saved. No proposal data will be transmitted to or processed by external, non-Government systems without appropriate safeguards and authorizations in place.
BASIS FOR AWARD
Award will be made to the offeror who provides the lowest Total Evaluated Price, who is deemed responsible and who is compliant with all the requirements of this solicitation.
Total Price is calculated as: CLIN 0001 Price plus CLIN 0002 Price = Total Evaluated Price.
In accordance with FAR RFO 52.212-1(d), the Government intends to award a contract against this solicitation without discussions.
LISTING OF ATTACHMENTS
Attachment 0001 – Purchase Description MJU-75B Impulse Cartridge Cup; 28OCT2026
Attachment 0002 - DWG 201719311 Rev – Blank Point Impulse Cartridge Cup
Attachment 0003 – DWG 201719312 Rev – Coined Point Impulse Cartridge Cup
Attachment 0004 – DWG 201719314 Rev – Coining Tooling
Attachment 0005 - Lot Number Instructions
Attachment 0006 – Price Sheet
Attachment 0007 – Provisions & Clauses
DEADLINE FOR SUBMISSION
Offers are due on 25 November 2026 no later than 12:30 PM Central Time.
Offers shall be submitted in the following way:
Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Ryan Buhman, ryan.j.buhman.civ@army.mil. Offerors shall include “W519TC27QICUP Response – [Insert Offeror’s Name]” within the Subject line.
QUESTIONS
Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above.
**Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received within a reasonable time prior to close of the solicitation may not be considered.
End of Addendum 52.212-1