Opportunity
Federal Register #FAA-2026-13814
FAA proposed airworthiness requirements for Airbus EC 155 B and EC 155 B1 helicopters
Buyer
Federal Aviation Administration (FAA)
Posted
November 16, 2026
Respond By
January 01, 2027
Identifier
FAA-2026-13814
The Federal Aviation Administration proposes updated safety requirements for Airbus Helicopters EC 155 B and EC 155 B1 helicopters. - Government buyer and action: U.S. Department of Transportation, Federal Aviation Administration (FAA); this is a proposed airworthiness rule, not a procurement or award. - OEM: Airbus Helicopters is the affected aircraft manufacturer. The FAA references European Union Aviation Safety Agency (EASA) airworthiness requirements; EASA is not a supplier. - Required actions: Replace jettisonable windows and seals on sliding doors and fixed panels on both sides of applicable helicopters, and install new labels. - Include applicable procedures for helicopters with tinted windows installed through modification OP52C38. - Safety purpose: Address excessive force needed to jettison windows, which could hinder emergency evacuation and put occupants at risk. - Quantities and part numbers: Not specified.
Description
The FAA proposes to supersede Airworthiness Directive 2025-24-01 for all Airbus Helicopters Model EC 155 B and EC 155 B1 helicopters. The existing directive requires replacement of jettisonable windows and seals on sliding doors and fixed panels, and installation of new labels. The proposed directive retains those actions and adds requirements for helicopters modified with tinted windows, addressing procedures missing from the previously applicable service information. The FAA cites the risk of reduced ability to evacuate helicopter occupants during an emergency and resulting injury.