SAM #PR511096

ORNL seeks configurable signal-conditioning interfaces and I/O cable sets

Oak Ridge National Laboratory is seeking configurable signal-conditioning hardware and I/O cabling for its Electrification and Energy Infrastructure division. - Government buyer: U.S. Department of Energy, Oak Ridge National Laboratory (ORNL), Electrification and Energy Infrastructure division; solicitation PR511096. - OEMs and vendors: No manufacturers, brands, or vendors are identified in the notice or attachment. - Products requested: - 4 configurable signal-conditioning interfaces, each with 8 modules in a 6U, 19-inch form factor, or equivalent. - 2 one-meter I/O cable sets, or equivalent; the attachment describes each set as a pair of DIN 41612 cables. - Interface module requirements: Slots A–B: high-voltage cards, 8 channels at 130 V RMS each; slots C–D: current-output cards, 8 channels at 2 A RMS each; slot E: analog-input card, 16 channels at ±10 V RMS or ±20 mA; slot F: analog-output card, 16 channels at ±10 V RMS or ±20 mA; slot G: digital-input card, 32 channels, 3.3–24 V logic high; slot H: digital-output card, 32 channels at 3.3, 5, 15, or 24 V. - Notable requirement: Products may be equivalent to the described configuration. No part numbers are provided.

Description

UT-Battelle, LLC is the management and operating contractor of Oak Ridge National Laboratory (ORNL). The Electrification and Energy Infrastructure division at ORNL is in need of 4 configurable signal conditioning interfaces with 8 modules. 6U, 19" and 2 IO Cable sets (1m) or equivalent. Please reference Attachment C- RFQ511096 Bill of Materials.    Attachments:  - RFQ511096 - Attachment A- Terms and Conditions Purchase Order Commercial Products and Services - Attachment B- Prime Flowdown Clauses - Attachment C- RFQ511096 Bill of Materials - Attachment D- Reps and Certs Abbreviated

View original listing