SAM #70ZU0227N40020B00

U.S. Coast Guard intent to sole-source three PILECO pile driver hammers

The U.S. Coast Guard plans to buy three PILECO pile driver hammers through an intended sole-source procurement. - Buyer: U.S. Coast Guard, CG-SEA-C22. - Procurement status: Notice of intent to award sole-source; this is not a request for competitive proposals. Interested vendors may submit capability information for the Government’s consideration. - Item: Three pile driver hammers, NSN 3895-01-681-8298, part number D6-42 or 6-32-T019. - OEM and rationale: PILECO INC. is identified as the OEM. The Coast Guard cites PILECO’s proprietary knowledge, expertise, and specialized capabilities, and says no other vendor has been identified that can meet compatibility, quality, and performance requirements. - Packaging and marking: Must follow ASTM D3951-98 and applicable Technical Publication 3124 requirements, including protective clamps, covers, screws, and caps; individual packaging under MIL-STD-2073, Method 10; and reusable Type V, Style B covered crates with cushioning, blocking, and bracing for multiple cross-country shipments. Marking must comply with MIL-STD-129R and Code 39 barcoding under ISO/IEC 16388:2007.

Description

The U.S. Coast Guard intends to award a sole source contract to (PILECO INC.) for (HAMMER, PILE DRIVER). This procurement is being conducted under the authority of FAR 13.106-1(b), which permits sole source awards when only one responsible source and no other supplies or services will satisfy agency requirements.

(PILECO INC.) is the original equipment manufacturer (OEM) and possesses proprietary knowledge, technical expertise, and specialized capabilities that are essential to meet the requirements of this procurement. No other vendor has been identified that can provide the required goods/services with the same level of compatibility, quality, and performance.

Key Details:

       LINE ITEM 1:

Vendor Name: PILECO INC NAICS Code: 333120 Item Name: HAMMER, PILE DRIVER, NSN: 3895-01-681-8298 PN: D6-42  OR  6-32-T019 Qty: 03 EA

Packaging Requirements:

PRESERVATION: THE CONTRACTOR SHALL PREPARE AND COAT ALL EXTERIOR AND INTERIOR

SURFACES, AS APPLICABLE AS PER ASTM D3951-98. ALSO TO PREPARE FOR TRAVEL, INSTALL

SAFETY/PROTECTION CLAMPS, COVERS, SCREWS, AND CAPS IN ACCORDANCE WITH SECTION 3 OF

TECHNICAL PUBLICATION 3124.

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073- L E METHOD 10, UTILIZING

CUSHIONING, BLOCKING AND BRACING INSIDE A TYPE V, STYLE B COVERED REUSABLE CRATE

WITH LAG BOLTS CONFORMING TO ASTM D6039. THESE HAMMERS MUST BE CRATED TO PROTECT

THEM FROM MULTIPLE CROSS COUNTRY SHIPMENTS.

MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39

SYMBOLOGY.

PACKAGE LABEL:

ITEM NAME:

PART NUMBER:

NSN:

QNTY: (EXAMPLE 1 EA)

COND-A

CONTRACT NUMBER / ORDER NUMBER.

This Notice of Intent is not a request for competitive proposals. However, any interested party that believes it can fulfill the requirements may submit a capability statement to the point of contact listed below.  Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement.  A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government.  No reimbursement for any cost connected with providing capability information will be provided.  Telephone requests will not be honored.

View original listing