SAM #N6339427Q4006

Turnkey weatherproofing and maintenance for 41 modular workspace units

The Department of the Navy is seeking turnkey weatherproofing for 41 stored modular workspace units at the Naval Surface Warfare Center Port Hueneme Division. - Government buyer: Department of the Navy, Naval Sea Systems Command (NAVSEA), Naval Surface Warfare Center Port Hueneme Division. - Scope: Procure and deliver a custom-fitted weatherproofing solution, prepare surfaces, install and seal the system, and perform quality assurance. - Units: 41 wood-framed modules: 30 measuring 12 by 36 feet and 11 measuring 12 by 16 feet. - Protection requirements: Cover each unit from its bottom chassis to the roofline, excluding the bottom three-foot poly stilts; withstand coastal rain, wind, ultraviolet exposure, and salt spray. Individual wrapping is preferred; grouped wrapping may be accepted if protection is equivalent. - Installation and upkeep: Avoid unapproved penetrating attachment methods. Conduct maintenance inspections every 60 to 90 days for 12 months after acceptance. - OEMs and vendors: None are named; no specific product or part number is identified.

Description

To address facility workspace capacity requirements at Naval Base Ventura County, forty-one (41) wood-framed modular workspace units have been procured and will ultimately be assembled within a designated facility structure. The modules are currently stored outdoors in designated staging areas pending final installation. This requirement is for the procurement, delivery, and on-site assembly of heavy-duty, non-chemical weatherproofing systems to protect the modular units from environmental degradation during temporary outdoor storage, including rain, wind, ultraviolet exposure, and marine moisture in a coastal environment. The required system is a complete turnkey weatherproofing solution for forty-one (41) stored modular units consisting of thirty (30) 12 feet x 36 feet units and eleven (11) 12 feet x 16 feet units. The system must be custom-fitted on-site and provide durable, tightly secured, weather-resistant protection from the bottom chassis to the roofline, while excluding the bottom 3-foot poly stilts from coverage. Individual wrapping is the standard approach; however, grouped wrapping of adjacent modules may be considered where site conditions or unit spacing make individual wrapping impracticable, provided the same level of protection and performance is maintained. Functionally, the weatherproofing system supports preservation of the modular units structural condition and serviceability during long-term outdoor storage until installation. The system must be suitable for coastal outdoor exposure, resist UV degradation and salt-spray weathering, withstand high-wind conditions in accordance with manufacturer-approved installation guidance, and avoid damage to the modular units through unapproved penetrating attachment methods. The requirement also includes full surface preparation, precision fitting and sealing, quality assurance verification, and recurring maintenance inspections every sixty (60) to ninety (90) days for twelve (12) months after acceptance to ensure continued weather-tightness and identify any moisture intrusion or system degradation. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for N6339427Q4006Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing