SAM #SPMYM227Q0118

DLA Maritime – Puget Sound procurement of certified ASTM A36/A36M steel bar

DLA Maritime – Puget Sound is seeking 20 feet of certified 7-inch-diameter ASTM A36/A36M steel bar for delivery to Puget Sound Naval Shipyard. - Government buyer: Defense Logistics Agency (DLA), Department of Defense; DLA Maritime – Puget Sound, Contracting Division (DLA-PME). The solicitation identifies Karl Lindley. - Product: 20 feet of round steel bar, NSN 9510-LL-S05-4758, supplied in two 10-foot lengths. Copper-bearing steel is acceptable. - OEMs and vendors: No manufacturer or vendor is named in the available documents. - Requirements: Meet the applicable ASTM A36/A36M specification revision at award; provide a mechanical property test report for each heat and certification of chemical and mechanical properties with actual values. Certificates must be traceable to the material through unique markings; mercury-free material and shipment marking per MIL-STD-129 are required. - Certification documentation is required for the bar and must be attached in WAWF; it is accepted or rejected with the corresponding material, not before shipment. Delivery is requested to Puget Sound Naval Shipyard, FOB destination to Bremerton, Washington.

Description

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV

ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.

To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)

Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period

  Please read the contract in its entirety.

  If you are able to provide a quote be sure to provide the following information in the sections provided below:

Page 1 BLK 17a. Provide Contractor's info and cage code. Section A. A1 – 1. Enter The Contractor's POC Section B. – Enter your Quote and any other info we should know. Please quote FOB Destination BREMERTON, WA. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing Section F. –  Provide the Lead Time and/or Delivery Date. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes Page 1 -  Read box 28 and sign boxes 30 a, b, and c. Return the signed and filled out solicitation with your quote by SUNDAY, 28 SEPTEMBER  2025 7AM 

FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.

EMAIL:  karl.lindley@dla.mil

Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process."

View original listing