CanadaBuys #5P468-26-0265/A

Hattie Cove Water Treatment Plant modernization and equipment upgrades

Parks Canada is seeking construction and equipment work to modernize the Hattie Cove Water Treatment Plant at Pukaskwa National Park. - Government buyer: Parks Canada Agency; National Procurement Service / National Contracting Services. Issuing office listed as Parks Canada, Cornwall, Ontario. - Active work: Supply, install, wire, and connect one annunciator panel; install one exterior red alarm light; and wire four pumps using twist-lock electrical connections. Confirm alarm and monitoring points with Parks Canada before buying the panel. - Specified equipment and OEMs: Drawings name Stenner E20PHM-M chemical metering pumps; Franklin Electric MH-series pumps (30FMH2D5-T and 70FMH3) and SubDrive Connect drives; Flexcon PJR 66S pressure tank; Mixmaster BAF12 retention-tank baffle; Harmosco HC/40-20 cartridge filter; Viqua and QUA PR020 UV units; Carlon JLP1000-L, 200SSM, and 1000SSM flow meters; Clay-Val 58-01 valve; Pentek ECP5-20BB filter housing/cartridge; Well-Rite WR240R pressure tanks; and Endress+Hauser Waterpilot FMX11 level transmitter. The drawing also identifies one RACO Verbatim Gen2 cellular alarm dialer, but the cellular alarm panel is deferred from the current work scope. WT Infrastructure is named as drawing preparer, not as a specified equipment manufacturer. - Drawing quantities where stated: One Stenner E20PHM-M shelf spare; one Flexcon PJR 66S tank; one Mixmaster BAF12 retention tank; one each of the listed PR020 UV units (Viqua and QUA models are separately identified); four Well-Rite WR240R tanks; one 200SSM meter, one ECP5-20BB filter, one 1000SSM meter, and one FMX11 transmitter. Quantities are not stated for several other drawing-listed items. - Services and requirements: Test and verify affected systems; conduct raw-water jar testing and determine optimal PAC dosage; install required high-/low-point valves and air-release valves; perform winter shutdown, protect existing infrastructure and potable water, restore and clean the work area, and provide as-built, operating, maintenance, inspection, testing, certification, and commissioning documentation. Four outbuildings are excluded from the current scope. - Notable standards and schedule: Follow applicable Ontario codes and standards; equipment must be CSA-approved or certified where applicable, and Canadian-made products are preferred. Complete installation work in late 2026, with water-system testing planned for spring 2027 before commissioning.

Description

Parks Canada Agency is seeking a contractor to provide labour and materials to upgrade the Hattie Cove Water Treatment Plant in Pukaskwa National Park. Work includes supplying, installing, wiring, and connecting an annunciator panel; installing an exterior red alarm light; and wiring four pumps with twist-lock electrical connections. The scope also includes testing and verification, required closeout documentation, environmental and safety measures, and leaving the plant safe and operational. Work must be completed by December 4, 2026; proposed work at four outbuildings is excluded from this project.

View original listing