Saskatchewan Tenders #2627-034

SRC MSU Dust Collection Hood and Ductwork System

The Saskatchewan Research Council (SRC) is seeking a complete dust-capture system for its Metal Smelting Unit. - Government buyer: Saskatchewan Research Council (SRC); no sub-agency or office is identified. - Procurement: Design, fabrication, and supply of an exhaust hood and ductwork package to capture gases from eight furnaces and convey them to the existing wet scrubber. - System basis: Approximately 16,480 CFM total airflow, based on a preliminary concept of four hoods at about 4,120 CFM each. Suppliers may propose alternatives that maintain or improve capture performance; these are design parameters, not specified purchase quantities. - Equipment and materials: Complete hood and ductwork package, including transitions, fittings, flanges, seals, flexible connections, dampers or gates, access panels, drains, supports, hangers, and assembly hardware. Materials must suit potential HF exposure below 5 ppm, a 50–60°C design temperature, moisture, condensate, and fluoride-containing deposits. - Supplier deliverables: Engineering basis and assumptions, coordinated fabrication and installation drawings, airflow and pressure-loss calculations, material compatibility information, weights and support loads, bill of materials, QA/QC and inspection information, assembly and installation instructions, maintenance recommendations, and final fabrication records or as-built drawings. - Delivery and installation: Supply is specified DAP Saskatoon; field installation is by others. - Named organizations: Saskatchewan Research Council (buyer). No OEMs, product brands, or third-party vendors are named; no part numbers are provided. - Term: No fixed project duration or delivery date is stated. A resulting agreement may be extended by mutual agreement for additional related requirements for approximately five years.

Description

Saskatchewan Research Council is requesting quotations for the design, fabrication, and supply of an MSU dust collection system for its metal smelting unit facility. The supplier must provide a complete exhaust hood and ductwork package, including required fittings, connections, supports, and assembly hardware, suitable for installation at the SRC site by others. The system is intended to capture furnace gases, including potential hydrogen fluoride-containing fumes, and convey them to the wet scrubber system. Quotations are due November 10, 2026, at 2:00 PM CST.

View original listing