SAM #N3904027Q3208

Rental of a 100 HP, 400 SCFM LPAC System with Setup and Maintenance

Portsmouth Naval Shipyard is seeking a short-term rental of a complete, electric-powered low-pressure air compressor system for Tool Air service in Groton, Connecticut. - Government buyer: Department of the Navy, Naval Sea Systems Command (NAVSEA), Portsmouth Naval Shipyard (PNSY), Contracting Code 410.2. The RFQ identifies William LeDuc III. - Requested equipment: One 100 HP, 400 SCFM oil-free LPAC system, with a 500-gallon air receiver, 400 CFM desiccant dryer, air hose, manifold, power cable, and E-stop cable wire. No OEM, vendor, or manufacturer part numbers are specified. - Rental duration: Four-week base rental, with a two-week extension option. The system is intended for Submarine Base New London in Groton, Connecticut. - Key technical requirements: 115 PSIG regulated air delivery; -40°F pressure dew point; outdoor weather protection and operation from -10°F to 110°F; and a compressor rated for 460 VAC, three-phase, 60 Hz power. The air receiver and dryer have specified pressure ratings and connections. - Required support: Delivery freight, installation and commissioning, leak checks and system setup, operator training, preventive maintenance, weekly inspections, and maintenance/operating documentation. - Repair requirements: Provide repair service within 12 hours of notification; if the system cannot be restored within 24 hours, provide a replacement at no additional charge. Emergency repair contact information is required. - Documentation: Provide a preventive maintenance plan, weekly inspection reports, current operating manuals and equipment data sheets, supplemental manual information, and a contractor personnel roster identifying the emergency repair contact. Some documents must also be kept with the equipment in a waterproof case.

Description

Portsmouth Naval Shipyard (PNSY) is seeking to lease one electric powered Low Pressure Air Compressor (LPAC) in accordance with the Statement of Work (SOW). The applications are for establishing a Tool Air system.

Please review the attached SOW and Request for Quote (RFQ). Please return a completed RFQ with all required fields filled in as well as any supporting technical information (tech spec sheet, brochure etc).

All submission must be emailed and received prior to the deadline specified on the RFQ. Please email William (Bill) LeDuc with any questions at william.v.leduciii.civ@us.navy.mil.  

View original listing