SAM #140RR027R0014

Water-Line and Facility Replacement at Oak Shores and Smittle Recreation Areas

The Bureau of Reclamation is gathering market information for water-line and related facility replacement work at two recreation areas in Napa County, California. - Government buyer: Department of the Interior, Bureau of Reclamation, California Great Basin Region, Reclamation Contracting Activity. - Work requested: Replace a 2-inch main lateral gate valve; install valve boxes and risers, 1-inch water lines, pressure-reducing valves, gate valves, and a pressure gauge; connect galvanized piping to existing copper lines through the Chase room; and flush and pressure-test the connections before backfilling. - Locations: Oak Shores and Smittle Recreation Areas, Napa County, California. - Notable requirements: 100% performance and payment bonds are required. The estimated project cost is $500,000–$1,000,000. - OEMs and vendors: No manufacturers, OEMs, or commercial vendors are identified. No product part numbers or quantities are provided. - Opportunity status: This is a sources-sought market research notice, not a request for proposals.

Description

This announcement is to all Small Business, 8(a) Small Business, HUBZone Small Business, Indian Small Business Economic Enterprises, Service-Disabled Veteran-Owned Small Business and Women-Owned Small Business concerns that may be interested in performing a contract for the California Great Basin Region of the Bureau of Reclamation. The work to be performed is described below. Based upon response to this announcement, the Government may determine to set this acquisition aside or proceed with an unrestricted solicitation. The applicable North American Industry Classification System (NAICS) Code is 237110 and the related small business size standard is $45M. This notice is not a request for proposal and the information presented in this announcement will not obligate the Bureau of Reclamation in any manner. The estimated cost of this project is $500,000.00-$1,000,000.00. This procurement will require 100% performance and payment bonds.This sources sought notice is for market research and acquisition planning purposes only. No formal solicitation for this work exists at this time. The work is located at the Oak Shores and Smittle Recreation Areas located in Napa County, California.Interested parties should include the following information in their response: (a) Business name, address, cage code, size classification based on NAICS size standard, socioeconomic classification (i.e. HUBZone; 8(a), etc.), and a point of contact; (b) A positive statement of your intention to submit an offer for this solicitation as a prime contractor; (c) Evidence of your experience performing work similar in type and scope to the work in this announcement within the last five years. The evidence should include: contract numbers, project titles, dollar amounts and points of contacts with telephone numbers. Please do not include more than three past projects; and (d) Include attachments cataloging the company's equipment assets, personnel resources and financial resources that demonstrate company responsibility and capability to perform required work.(e) If bonding is required, also provide evidence of your bonding capacity;All interested parties are encouraged to respond to this notice, by e-mail to Marianna_mezentseva@ios.doi.gov not later than 5PM PDT on November 11, 2026. The information provided in this announcement is all information the Government has available at this time. There are no specifications, drawings, bid packages, or source lists available.System for Award Management (SAM) applies to this procurement. Prospective contractors must be registered in the System for Award Management (SAM) prior to award. Lack of registration in the SAM database will make an offeror ineligible for award. Information on SAM registration can be obtained via the Internet at http://www.sam.gov PRINCIPAL COMPONENTS OF WORK: ¿ Replace 2¿ gate lateral valve at Main rated for 200 psi.¿ Install N30 utility valve box w/water on lid, and appropriate quantity of risers to surface grade at Main lateral shut off 2¿ valve¿ Reduce to 1¿ for lateral pipe to C.S. Install 1¿ lateral water line from main line 2¿ valve to PRV and 1¿ gate valve at rear of C.S. at Chase room¿ Install 1¿ pressure reducing valve and 1¿ gate valve at rear of C.S. at Chase room Exterior in the proximity ¿ Install 1¿ pressure reducing valve and 1¿ gate valve rated for 200 psi. ¿ Install N30 utility valve box w/water on lid, and appropriate quantity of risers to surface grade over 1¿ PRV and gate valve¿ Drill holes in brick on each side of C.S. Chase room access door approx. 1 ft above exterior floor¿ Install 1¿ galvanized pipe from exterior PRV/gate valve, split into 2 lines, and run pipe in each hole to near interior copper line connection point. Fill wall holes with concrete.¿ Install interior PRV and 1¿ gate valve, and tee with pressure gauge (1¿ face 0 to 60 psi) after PRV between 1¿ galvanized pipe and copper pipe, connect to copper pipe on each side of Chase room ¿ Flush and pressure test all connections prior to backfill of excavation from main lie to copper line connections interior of Chase room

View original listing