SAM #47QSSC27Q0027

Olsun Electrics 300 kVA dry-type transformer with testing and delivery

The General Services Administration is procuring a brand-specific transformer for U.S. Navy utility operations at Naval Base San Diego. - Government buyer - General Services Administration (GSA), Federal Acquisition Service (FAS), Direct Demand Contract Solutions Division. - End user: U.S. Navy, supported by NAVFAC SW MPD HVE Utilities; the requirement supports Navy and Marine Corps installations. - Delivery location: Naval Base San Diego, California. - OEM - Olsun Electrics is the specified manufacturer. The RFQ requires the Olsun product and states that substitutions are not acceptable. - Requested product - One 300 kVA cast-coil, copper-wound, pad-mounted, dry-type transformer for customer unit Pad B4-PS4-T64. No part number is provided. - Electrical configuration: 12 kV delta primary to 208Y/120 V wye secondary; three-phase, 60 Hz, Delta-Wye step-down (Dyn1). - Outdoor enclosure: NEMA 3R, 316 stainless steel, Munsell Green finish; tamper-resistant, compartmentalized, dead-front design with padlockable door, radial feed, and three 200 A bushing wells. - Other stated specifications include K-factor 1, minimum 5.75% impedance, 80°C temperature rise, 180°C insulation, and AA air cooling. - Services and notable requirements - One certified post-production test with IEEE/ANSI standard production tests, plus shipping to Naval Base San Diego. - The Navy identifies the dry-type transformer as necessary for the site; oil-filled alternatives are unsuitable because containment pads are not available.

Description

This Request for Quote (RFQ) is for the purchase, delivery, and testing of one Olsun Electrics 300k pad mount transformer.

For requirements and delivery information please see attached RFQ document.

For quote to be considered valid, return BOTH the completed RFQ document and the MIL-STD 129 compliance document signed on page 8 via email to cara.fowler@gsa.gov

View original listing