SAM #82247

Removal and disposal of one Quintus ABB fluid cell press at Robins Air Force Base

The Department of the Air Force is seeking heavy-equipment removal and disposal services for a fluid cell press at Robins Air Force Base. - Government buyer: Department of the Air Force, through Air Force Materiel Command, Air Force Sustainment Center, and FA8571 Maintenance Contracting AFSC PZIM; the requirement is for the Maintenance Support Group (MXSG), including 402 MXSG, at Robins Air Force Base, Georgia. Government point of contact named in the site-visit notice: Thomas (Matt) Curtis. - OEMs: Quintus and ABB are named in connection with the press. - Equipment: Remove and dispose of one Quintus ABB QFC 1.6 x 4-1400 fluid cell press from building 140. The listed components total approximately 337,000 pounds: upper filler piece (64,000 lb), pressure plate (32,000 lb), lower filler piece (86,000 lb), unwound main cylinder (148,000 lb), and plating attached to the lower filler (7,000 lb). - Work requested: Provide labor, tools, equipment, materials, and transportation to decommission, dismantle, rig, and remove the press. Components may be moved to an on-base cutting site for size reduction or transported intact off base; scrap and debris must be hauled away, and the work areas restored. - Notable requirements: Follow the designated access route and 350 PSI floor-load limit. On-base cutting requires hot-work controls, including permits and accessible fire extinguishers. The contractor must submit a Technical Removal Plan for approval before mobilization or physical work; scrap value is retained as specified in the work statement.

Description

The Contractor shall provide to the Maintenance Support Group (MXSG) all the tools, parts, materials, equipment, labor, and transportation necessary to decommission, remove, and dispose of one (1) Quintus ABB QFC 1.6 x 4-1400 fluid cell press. The equipment is located in building 140 at Robins Air Force Base (AFB), Georgia. Decommissioning services shall include dismantling, rigging, relocating the components to a designated on-base cutting site, reduction of major components to recyclable sizes, and hauling all resulting scrap and debris off Robins AFB. Upper Filler Piece: 64,000 lbs; Pressure Plate: 32,000 lbs; Lower Filler Piece: 86,000 lbs; Unwound Main Cylinder: 148,000 lbs; Plating attached to Lower Filler: 7,000 lbs (see Performance Work Statement for full details)

View original listing