SAM #70ZL7126R622000001

USCG market research for a complete live-fire maritime and urban training facility

The U.S. Coast Guard is gathering industry input on a complete live-fire maritime and urban training facility for its Special Missions Training Center at Marine Corps Base Camp Lejeune. - Government buyer: U.S. Department of Homeland Security, U.S. Coast Guard (USCG), Special Missions Training Center (SMTC); installation location is Marine Corps Base Camp Lejeune, North Carolina. - Opportunity: Market research for a complete, operational Joint Maritime Training Facility. This is an RFI, not a solicitation. - OEMs and vendors: No OEMs, vendors, or product manufacturers are named in the materials. The 6.8 mm XM1188E1 designation identifies the planning ammunition threat, not a named supplier. - Requested facility and equipment: - One integrated live-fire maritime/urban training system. Planning dimensions include a roughly 50-by-120-foot live-fire area, an overall footprint of about 140 by 70 feet, and a tower-deck elevation of about 30 feet; final dimensions require verification. - Ballistic wall system, with planning basis of nominal 8-foot walls using approximately 3/8-inch AR500-class steel or equivalent, plus a 12-inch sacrificial ballistic-rubber layer or suitable bullet-trap target system. - Projectile-management and ricochet-mitigation surfacing, planned at approximately 2 inches of ballistic rubber or equivalent. - Reconfigurable ballistic panels for selected exterior openings, interior hallways, and doorways. - Up to 34 portable bullet traps; final quantity, rating, mobility, and maintenance requirements are to be recommended by the contractor. - One three-level stair training tower or equivalent, with corrosion-resistant access structures, ballistic protection, partial overhead containment, and engineered rappel/vertical-access anchors. - Maritime and urban training features, including ship-style doors and hatches, knee-knocker thresholds, ladders, grated decks, confined passageways, configurable rooms and hallways, conventional openings, and multiple entry/exit points. - Observation catwalks and viewing platforms, plus required foundations, site work, electrical and lighting, ventilation, weather protection, fire/life-safety, and egress systems. - Notable requirements: Ballistic containment must be designed and validated for 6.8 mm XM1188E1 ammunition under Government-approved firing geometry, distances, and conditions. The design must support modular, multi-level training and withstand the coastal environment through appropriate corrosion and weather protection. - Requested services: Design and engineering; site preparation and construction; fabrication, delivery, installation, and integration; testing and ballistic certification or validation; commissioning and acceptance support; documentation and as-built records; operator/instructor and maintenance training; and lifecycle-support recommendations. - Performance period: No more than 300 calendar days from award or Notice to Proceed; no option years or subscription term are stated. - Market-input request: Industry capability and past-performance information, conceptual design and validation approach, preliminary schedule, and nonbinding rough-order-of-magnitude cost estimate.

Description

Purpose: The U.S. Coast Guard (USCG) is issuing this Request for Information (RFI) for market-research purposes to identify capable sources; available commercial solutions; current industry practices; potential acquisition approaches; and relevant technical, schedule, lifecycle-support, and cost information for the design, engineering, fabrication, delivery, installation, integration, testing, certification/validation, and commissioning of a Joint Maritime Training Facility (JMTF) live-fire maritime/urban training system.

Site Visit Location: Participants are requested to assemble at The Marine Corps Base Camp Lejeune Provost Marshal’s Office, located in Building 58 on Virginia Dare Drive, Camp Lejeune, North Carolina. Date: November 10, 2026

The contemplated requirement is for a complete and operational live-fire training system at the USCG Special Missions Training Center (SMTC), Courthouse Bay, Marine Corps Base Camp Lejeune, North Carolina. The facility must support realistic, modular, multi-level tactical training, including maritime interdiction, close-quarters combat, vertical access, breaching, and related joint-service mission sets. The system must integrate ballistic containment with maritime and urban training features and be suitable for repeated use in an outdoor coastal environment. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 236220.

Disclaimer: There is no solicitation at this time. This RFI is not a request for proposals; submission of any information in response to this request is purely voluntary; the Government will not pay for any costs incurred nor is obligated to respond. All submissions become Government property and will not be returned. After reviewing RFI responses to this RFI, and if the USCG still plans to proceed with the acquisition, a solicitation announcement may be published on the Contract Opportunities (formerly FedBizOpps) website or distributed to contract holders if a strategically-sourced vehicle is deemed appropriate. It is the responsibility of the interested parties to monitor the Contract Opportunities website. Failure to respond or submit sufficiently detailed information may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information submitted, the Government reserves the right to consider any arrangement as determined appropriate for this requirement. No proprietary, classified, confidential, or sensitive information should be included in your response to this RFI. The Government reserves the right to use any information provided by respondents for any purpose determined necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation.

The anticipated contractor would provide all labor, supervision, project management, engineering, materials, equipment, transportation, installation, testing, documentation, commissioning, and training necessary to deliver a complete live-fire maritime/urban training facility. The anticipated effort includes: Complete facility design and engineering, including ballistic, structural, civil, architectural, mechanical, electrical, fire/life-safety, safety, and training-system interfaces. Preparation of a Design Basis Report; design packages; calculations; submittals; shop and fabrication drawings; installation plans; final as-built drawings; and operations and maintenance (O&M) manuals. Fabrication, delivery, installation, integration, testing, ballistic certification or validation, commissioning, and Government acceptance support. A ballistic wall and containment system rated and validated for the Government-approved firing geometry, engagement distances, and training conditions, with a planning threat basis of 6.8 mm XM1188E1 ammunition, with an additional 12-inch layer of sacrificial ballistic rubber blocks or an appropriate bullet-trap target system. Projectile-management and ricochet-mitigation surfacing; reconfigurable ballistic panels; and portable bullet traps. A multi-level training system incorporating urban, maritime, and lower-deck training areas; configurable rooms and corridors; ship-type doors and hatches; ladders; grated decks; confined passageways; vertical-access/rappelling features; observation catwalks; and instructor viewing platforms. Foundations, slabs, structural framing, site preparation, drainage, lighting, electrical distribution, ventilation/air exchange, weather protection, fire detection/alarm components, emergency egress, and other systems required for the approved design. Corrosion resistance and weather protection appropriate for a coastal Camp Lejeune environment. Operator/instructor training, maintenance training, recommended spare-parts lists, inspection checklists, maintenance schedules, and lifecycle-support recommendations. Project management, recurring coordination meetings, progress reporting, integrated scheduling, and coordination with Camp Lejeune access, safety, security, delivery, and range-operation requirements. The anticipated period of performance will not exceed 300 calendar days from date of award or Notice to Proceed. The primary place of performance will be Marine Corps Base Camp Lejeune, North Carolina; design and fabrication may occur at contractor facilities. The Government’s planning material includes differing conceptual dimensions—an approximately 50-foot by 120-foot live-fire footprint and an approximately 140-foot by 70-foot overall concept footprint with a tower-deck elevation of approximately 30 feet. Respondents should identify their recommended dimensions, elevations, clearances, and facility configuration, along with the assumptions supporting their recommendation.

Request: If your organization has experience designing, manufacturing, installing, certifying/validating, and sustaining live-fire ballistic training facilities, modular shoot houses, maritime training systems, tactical training towers, or comparable integrated training systems, please provide the following information: Organization name Address Website Point of contact name Point of contact email address Point of contact telephone number Socioeconomic status Unique Entity Identifier

Government-furnished information and resources. Identify the information, site data, access, utilities, training requirements, firing geometry, threat data, acceptance criteria, or other Government-furnished resources your organization would typically require to develop a firm technical and price proposal. Available contract vehicles. Identify any existing Government-wide acquisition contracts, General Services Administration schedules, multiple-award contracts, indefinite-delivery vehicles, or other strategically sourced contracts through which the USCG may order this type of requirement. Include the contract number, administering agency, contract scope, ordering limitations, and agency point-of-contact information. Relevant capability and past-performance summary. Describe organizational experience with comparable live-fire facilities, ballistic containment systems, tactical training systems, maritime or urban training features, multi-level towers, range safety systems, and coastal-environment construction. Include a brief description of up to three relevant projects, the customer type, work performed, completion date, and whether the effort involved live-fire certification or validation. Technical concept response. Provide a conceptual site and facility layout, narrative, or other appropriate documentation demonstrating how the proposed approach would satisfy the following requirements:

Three occupied training levels and a tower deck or comparable upper-level training feature. Integrated urban, maritime, lower-deck, engine-room, and tower training areas, as applicable. Ballistic containment suitable for the stated planning threat and approved firing geometry. Reconfigurable rooms, corridors, walls, doors, windows, and ballistic panels. Ship-style doors/hatches, knee-knocker thresholds, ship ladders/stairs, grated decks/platforms, and confined passageways. Live-fire-capable vertical-access and rappelling features with engineered anchor points. Instructor observation catwalks or viewing platforms that preserve ballistic safety and emergency egress. Projectile-management and ricochet-mitigation features, including recommended portable bullet-trap quantity, rating, mobility method, maintenance requirements, and operational limitations. Corrosion resistance, weather protection, drainage, ventilation, lighting, fire/life-safety, emergency egress, and utility concepts appropriate for the coastal installation environment.

Recommended design and validation approach. Describe the proposed design basis, ballistic-system design methodology, quality-control procedures, and recommended method for demonstrating that the installed system meets the approved threat, firing geometry, engagement distances, and training conditions. Identify any test evidence, engineering documentation, or third-party certification/validation that would be provided. Preliminary schedule and installation approach. Provide a notional schedule addressing design, Government review/approval periods, long-lead procurement, fabrication, shipping, site preparation, foundations, installation, testing, training, certification/validation, and final acceptance. Identify principal schedule risks and measures to support completion within the anticipated 300-calendar-day period of performance. Rough-order-of-magnitude (ROM) cost information. Provide a nonbinding ROM estimate, with separate estimates for:

Design and engineering Site preparation, foundation, and drainage Shoot-house/training system Ballistic enclosure and protective materials Steel weather cover Electrical, lighting, ventilation, and fire/life-safety systems Portable bullet traps Shipping and installation Testing, certification/validation, and commissioning Operator and maintenance training Warranty, sustainment, recommended spare parts, and replacement components

Identify major pricing assumptions, exclusions, cost drivers, and anticipated escalation or long-lead-material risks.

Maintenance and lifecycle support. Describe the recommended inspection intervals, replacement criteria for sacrificial ballistic materials, corrosion-control approach, bullet-trap servicing requirements, repair procedures, recommended spare parts, expected component service life, and anticipated sustainment support. Teaming and subcontracting. If significant subcontracting or teaming is anticipated, describe the anticipated logistical, administrative, quality-control, and management structure for the arrangement. Identify the functional areas proposed for subcontracting, such as design engineering, ballistic systems, fabrication, civil/site work, electrical/mechanical work, installation, or certification/validation. General comments. Provide any additional comments, questions, recommendations, concerns, assumptions, exclusions, or feedback that would assist the Government in refining the requirement or acquisition strategy.

Submission Instructions: Interested parties are invited to submit a response to the above questions by November 15, 2026 1100am EST. All responses and questions regarding this RFI must be emailed to richard.w.choquette@uscg.mil and JMTC-TSC@uscg.mil.

Site Visit Location: Participants are requested to assemble at The Marine Corps Base Camp Lejeune Provost Marshal’s Office, located in Building 58 on Virginia Dare Drive, Camp Lejeune, North Carolina. Date: November 10, 2026 Time: One-hour appointment windows will be available from 0900 to 1500 EST. Participants must schedule an appointment with SMTC staff by emailing Mackenzie.C.Young@uscg.mil and JMTC-TSC@uscg.mil to reserve a time block to present their proposal. No personnel with felony convictions are permitted to access any circumstance. All vendors interested in attending a site visit shall follow the Base Access Instructions (Marine Corps Base Camp Lejeune). https://www.lejeune.marines.mil/Sections/Provost-Marshals-Office/#sponsored-visitor-requests

Access to Marine Corps Base Camp Lejeune is controlled. Contractors must comply with all installation access requirements in effect at the time of performance. The following guidance is provided to minimize delays; requirements are subject to change by the installation. To avoid long processing times, all sponsors for unvetted visitors are highly encouraged to submit access requests at least seven (7) days prior to guest arrival for unescorted access. A REAL ID-compliant identification document is required to access Department of War (DoW) / Department of Defense installations. Visitors without a REAL ID will be required to complete the Sponsored Visitor Form (SECNAV 5512/1) process. New Camp Lejeune Visitor Center (Building TT-13) hours are typically Monday through Friday from 5:00 a.m. to 9:00 p.m. and Saturday from 8:00 a.m. to 4:30 p.m. (confirm current hours before arrival). Upon arrival at MCB Camp Lejeune, visitors will report to the Visitor Center (Bldg. TT-13) to obtain a DBIDS credential. Identity will be validated, a criminal history check conducted, and the visitor photographed and digitally fingerprinted as required. Drivers must produce a valid driver’s license, state vehicle registration, and proof of insurance. Contractors are responsible for ensuring their personnel have the necessary identification and complete any required forms in advance. Failure to obtain timely base access does not relieve the Contractor of performance obligations under this contract. Questions regarding visitor access should be directed to the designated Government Point of Contact or the Camp Lejeune Provost Marshal’s Office. Current access process information and forms are available on the official Camp Lejeune website (Provost Marshal’s Office / Base Access sections). The Contractor shall verify the latest procedures prior to each visit.

View original listing