Opportunity

SAM #W912ES26QA100

Award for refurbishment of eight LD5 anchor bar assemblies

Buyer

USACE MVD W07v Endist St Paul

Posted

October 14, 2026

Identifier

W912ES26QA100

NAICS

811310, 332710, 332811, 332813

The U.S. Army Corps of Engineers awarded refurbishment work for eight used LD5 anchor bar assemblies from Lock and Dam 9. - Government buyer: U.S. Army Corps of Engineers (USACE), St. Paul District (W07V ENDIST ST PAUL). - Awarded work: Refurbish eight Government-owned anchor bar assemblies as matched sets. - Required work: Disassemble the assemblies; clean and degrease components; perform nondestructive testing and inspection; blast and paint exposed surfaces; apply anti-corrosive treatment; and reassemble to specified tolerances. - Condition: Assemblies are in poor condition, with seized components associated with limited articulation and lubrication. - OEMs and vendors: None identified in the available notice information.

Description

Amendment 2 is to modify Section L - Instructions, Conditions, and Notices to Offerors or Quoters; reducing technical submission requirements in volume I of quote. Amend Section M - Evaluation Factors for Award; the table establishing the pass/go criteria for technical evaluation; and to extend the date offers are due to 30 September 2026. Amendment 1 is to include a Question and Answer section in Section L - Instructions, Conditions, and Notices to Offerors or Quoters. This procurement is for the refurbishment of eight (8) used Government owned anchor bars assemblies recently removed from Lock and Dam 9. The anchor bar assemblies range in age from 30-90 years old, are in poor physical condition, and feature seized components due to a historic lack of articulation and lubrication. The contractor shall disassemble the anchor bar assemblies (as matched sets), clean/degrease all surfaces, perform non-destructive testing (NDT), inspect all components, blast/paint exposed surfaces, apply anti-corrosive treatments, and reassemble the units to tolerances.Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W912ES26QA100Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing