SAM #15F06727R

FBI Market Research for El Toro Range Design-Build Improvements

The FBI is researching a design-build project to improve its El Toro range in the Irvine, California area; this is a sources-sought notice, not a solicitation or contract award. - Government buyer: Federal Bureau of Investigation (FBI), FBI - Redstone Arsenal office. - Potential work: - Upgrade the range electrical system with a 225-kVA, 208Y/120V, three-phase transformer and a 600-amp main distribution panel. - Design and construct erosion-control and slope-stabilization measures at the 25- and 50-yard ranges, including retaining structures and drainage. - Assess and rehabilitate approximately 30,000 square yards of pavement, including asphalt repairs, subgrade stabilization, paving, and striping. - Fully renovate two restrooms. - Improve domestic water pressure to 60–70 psi, including equipment, controls, piping, and backflow prevention. - Construct a range concrete pad, walking paths, and reinforced firing lanes, with lane markings at 3, 5, 7, 15, and 25 yards. - OEMs and vendors: No OEMs, product brands, or vendors are identified in the notice. - Notable requirements: Interested firms should demonstrate relevant design-build experience, bonding capability, and ability to work in Southern California. Personnel must meet FBI security requirements, including U.S. citizenship. - Estimated project magnitude: $1 million to $5 million.

Description

THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice is issued solely for market research and planning purposes to determine the availability and capability of qualified sources under NAICS 236220. The Government is seeking responses from both small and large business concerns. This is not a solicitation, and no contract will be awarded from this notice.

Project Overview: The Federal Bureau of Investigation (FBI) is conducting market research for a potential Design-Build requirement supporting  improvements to a range in the Irvine, California area. The anticipated scope includes restroom upgrades, erosion control, concrete pad installation, electrical upgrades, and large-scale asphalt pavement repair. The estimated magnitude is between $1,000,000 and $5,000,000.  A brief outline of the work is below:

Electrical System Upgrade Provide and install a 225‑kVA transformer (208Y/120V, 3‑phase) and a 600‑amp main distribution panel. Erosion Control (25‑ and 50‑Yard Ranges) Conduct geotechnical borings and design a compliant erosion control system (retaining structures, drainage). Construct stabilization measures, install drainage, and provide as‑built documentation. Pavement Rehabilitation (~30,000 SY) Assess roadway conditions and drainage patterns. Perform milling, full‑depth asphalt repairs, subgrade stabilization, HMA paving, compaction, and final striping. Restroom Renovations Fully renovate two commercial restrooms, including demolition, framing, waterproofing, electrical, plumbing, fixtures, finishes, and accessibility components. Water Pressure Improvements  Assess existing domestic water system and design a solution to increase operating pressure to 60–70 psi. Furnish and install all new equipment, controls, piping, and backflow prevention. Range Concrete Improvements (25‑Yard Pad & Lane Markings) Survey, grade, and install new concrete pad, walking paths, and reinforced firing lanes. Install or tie into an existing lead‑collection system. Provide durable, visible lane markings at the 3, 5, 7, 15, and 25‑yard distances

Required Capabilities: Respondents should demonstrate experience in design-build construction projects of similar magnitude and complexity, including: restroom renovations, water pressure system installation, slope stabilization/erosion control, concrete pad construction, range marking, electrical upgradess, and asphalt roadway rehabilitation.

Submission Requirements: Interested firms should submit a capabilities statement (no more than 10 pages) including but not limited to the following information: • Company name, address, UEI, CAGE code, business size and socioeconomic status. • Bonding capability (single and aggregate). • Relevant project experience within the past 5 years. • Ability to perform work in Southern California. • Availability of personnel capable of meeting FBI security requirements (US Citizens only) • Statement of interest in performing as a prime contractor.

Submission Instructions: Responses shall be submitted via email to the following: Amanda Mobley, Contracting Officer – almobley@fbi.gov

Disclaimer: This Sources Sought Notice is for informational purposes only and does not constitute a solicitation. No reimbursement will be provided for any costs incurred in preparing a response. The Government has not determined the acquisition strategy and will evaluate capabilities from both small and large business concerns.

View original listing