Opportunity

SAM #W911S227U0010

Army solicitation for two thermal arc sound attenuation booths

Buyer

MICC-Ft Drum

Posted

October 02, 2026

Respond By

October 13, 2026

Identifier

W911S227U0010

NAICS

332322, 332420

The U.S. Army is seeking two custom thermal arc sound attenuation booths for McAlester Army Ammunition Plant. - Government buyer: U.S. Department of the Army, Mission and Installation Contracting Command (MICC), 419th Contracting Support Brigade, W6QM MICC–Fort Drum. - Named OEM/vendor: Qualitech is the only manufacturer/vendor identified by name; the solicitation allows similar products. - Requested booths: - One QT100118128TA or similar, measuring 77.5 × 102.5 × 116 inches. - One Qualitech QT77102116TA or similar, measuring 100 × 118.5 × 128 inches. - Required booth features: Each booth is supplied in two halves with assembly parts and hardware; 18-gauge galvanized flat-panel construction; single-slope roof; Rockwool insulation; galvanized perforated interior liner; entrance and exit doors with hardware and switches; internal ventilation plenum; welding-arm offset and cutout; anchoring plates and hardware; and internal bracing. - Technical requirements: Army engineering must review and approve a detailed technical description addressing each required feature before award. Conceptual/as-built and approval drawings are requested. Native SolidWorks, IGES, or STEP 3D models are requested after award. - Work by the Army/others: The Army provides installation, building air, and auxiliary components such as exhaust fans, lights, and switches.

Description

Thermal Arc Booth Salient Characteristics MCAAP Engineering will verify and validate the proposal from the vendor prior to award.Scope: Thermal Arc Sound Attenuation Booth. Includes all necessary parts and hardware for a completely erected (in 2 halves) Thermal Arc Booth.Item/Model #: QT100118128TA or similar. 1 EAProduct Description:77.5-inch x 102.5-inch x 116-inch Booth.Includes all necessary parts and hardware for a completely erected (in 2 halves) Thermal Arc Booth.18ga galvanized flat panel construction with single slope style roof. Rockwool insulation enclosed in between the 3-inch-deep exterior wall panel and the galvanized, perforated interior liner. Unit is to be assembled and shipped with doors loose. Door hardware and switches included.All onsite installation, mounting, etc. are by others. All auxiliary components (exhaust fan, lights, switches, etc.) are supplied and installed by others.Model: Qualitech thermal arc sound attenuation booth model QT77102116TA or similar. 1 EA.Product Description:100-inch x 118.5-inch x 128-inch Booth.Includes all necessary parts and hardware for a completely erected (in 2 halves) Thermal Arc Booth.18ga galvanized flat panel construction with single slope style roof. Rockwool insulation enclosed in between the 3-inch-deep exterior wall panel and the galvanized, perforated interior liner. Unit is to be assembled and shipped with doors loose. All onsite installation, mounting, etc. are by others. All auxiliary components (exhaust fan, lights, switches, etc.) are supplied and installed by others.Thermal Arc Booth Dimensional specs:102.5-inch overall outer dimension entrance to exit face.86.5-inch overall outer dimension of booth depth.36.5-inch outer dimension of front booth section depth.20-inch outer dimension of back booth section depth including the welding arm offset.44-inch outer dimension wide by 9-inch outer dimension deep welding arm offset centered on the back booth section with a 114-inch tall and 26-inches wide cut out.30-inch door gap between the front and back booth sections.10-inch gap on the top between the front and back booth sections for monorail fed items.120-inch minimum interior height.3-inch-deep exterior wall panels.18-inch x 18-inch hole for duct transition piece located on the front booth section above the internal plenum.Features: Internally mounted entrance door that swings towards the front.Externally mounted exit door that swings towards the front.Door hardware and switches including cylinders and controls.Internal plenum in the front booth section for ventilation.Welding arms offset and cut out.18ga galvanized flat panel construction with single slope style roof.Rockwool insulation.Galvanized perforated interior liner.Mounting plates for floor anchoring.Anchoring hardware. Internal bracing.MCAAP to provide: Building air. Installation. Auxiliary components.DETAILED DESCRIPTION REQUIRED PRIOR TO AWARD: The MCAAP Engineering Support Division will validate and verify/approve the contractor listed equipment concept before award is granted. In order to meet this review requirement, the offeror shall submit with their proposal a detailed technical description of the thermal arc booth. The offeror��s description submittal shall account for each one of the required product features located in this qualifying statement. Conceptual drawings that are not detail ��as built�� drawings are required for submittal with the detailed description.Approval drawing(s) is/are requested. 3D models requested can be in native SolidWorks format, IGES, and/or STEP within two weeks after award. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S227U0010Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing