SAM #6-B185-Q-00462-00

Argonne National Laboratory request for one Libra 5514 Pro sCMOS camera and shipping

UChicago Argonne, LLC, operator of Argonne National Laboratory, is seeking a high-speed scientific camera and shipping for laboratory use. - Government buyer: U.S. Department of Energy, Argonne National Laboratory; operated by UChicago Argonne, LLC. - Requested products and services: One Libra 5514 Pro sCMOS camera and one shipping line. The camera quantity is one; no separate part number is provided. - Camera requirements: Back-illuminated global-shutter sCMOS sensor; 14 MP resolution (4608 × 3072); 5.5 μm pixels; peak quantum efficiency up to 83%; median read noise below 2 e⁻; and 77.5 dB dynamic range. - Frame rates: up to 670 fps at 14 MP and 8-bit, 480 fps at 10-bit, 350 fps at 12-bit, and 80 fps at 16-bit. - Interface: 100 G or 40 G CoaXPress-over-Fiber. Cooling: air cooling to 5 °C or liquid cooling to −5 °C. - OEMs and vendors: The documents name the Libra 5514 Pro model but do not identify its manufacturer. UChicago Argonne, LLC is the buyer/operator, not a camera vendor. - Notable requirements: The offeror must state the country of manufacture. Shipping insurance is to be excluded.

Description

THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY

Looking to source the same or similar as a Libra 5514 Pro camera with the following specifcations:

Sensor type: Back‑illuminated (BSI) global shutter sCMOS Pixel size: 5.5 µm × 5.5 µm Peak quantum efficiency (QE): up to 83% Sensor size: 30.5 mm diagonal (25.34 mm × 16.90 mm effective area) Resolution: 4608 × 3072 pixels (14 MP) Read noise: < 2 e⁻ (median) Dynamic range: 77.5 dB Frame rate: Up to 670 fps at 14 MP, 8‑bit; 480 fps @10‑bit; 350 fps @12‑bit; 80 fps @16‑bit Interface: 100 G CoaXPress‑over‑Fiber (CoF) or 40 G CoF Cooling: Air or liquid cooling to 5 °C (air) or –5 °C (liquid)

Please review all applicable documentation and provide a proposal response no later than 1:00 PM CST October 02, 2026.

Within your proposal, please include a fully executed copy of the ANL-70 Request for Quotation, the ANL-70A Reps and Certs, and the Country of Manufacture.

Any questions can be directed to the Contracting Officer.

Thank you in advance for your participation.

View original listing