Opportunity
PIEE #N4523A26Q1004
Maintenance, Repair, and Preservation Services for U.S. Navy Vessel IX-551 at Puget Sound Naval Shipyard
Buyer
Puget Sound Naval Shipyard
Posted
September 21, 2026
Respond By
October 28, 2026
Identifier
N4523A26Q1004
NAICS
336611
This opportunity is for maintenance, repair, and preservation services for the U.S. Navy vessel IX-551 at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF). - Government Buyer: - Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), U.S. Navy - Vessel Details: - IX-551, steel-hulled, 260 ft length, 85 ft width, 8 ft 6 in draft, 10 years old, displacement 2,267–3,070 long tons - Required Services: - Exterior hull cleaning, blasting, and preservation - Inspection and air testing of underwater skegs - Installation of new zinc anodes and hardware - Application of non-skid systems to decks - Cleaning and preservation of tanks and voids (including partial preservation of 24 tanks) - Inspection and maintenance of pumps and valves - Installation of new manhole gaskets and fasteners - Coordination of vessel delivery and return - Unique Requirements: - Contractor facility must be in the Puget Sound, WA region (Olympia to Bellingham) - Facility must accommodate vessel size and weight - Compliance with government oversight and safety documentation (MSDS) - No specific OEMs, vendors, or part numbers are named in the notice.
Description
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551. The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons. The Contractors facility must possess the capability of IX-551 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility. Upon docking the Asset, wash, and clean the exterior surfaces of the Asset. Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset. Fill, drain, air test, inspect each underwater skeg on the Asset. Accomplish visual inspections of hull and body and all tank/voids. Remove existing and install new zinc anodes and hardware on the underwater hull. Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull. Apply non-skid system to main deck and 02/03 level decks. Accomplish preliminary and final air tests to tanks/voids. Open, pump, ventilate, gas free and clean all tanks. Accomplish partial preservation of Qty (24 EA) tanks. Preserve tank/void manhole covers. Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders. Open and inspect all pumps and overboard discharge valves. Accomplish visual inspection and final closeout inspection of each tank/void upon completion of all work. Install new manhole gaskets and fasteners. Undock the Asset. Arrange and coordinate the delivery of the Asset back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by this Statement of Work or described in this Scope Overview are included in section 3.0 of the Statement of Work. The IX-551 will be ready for pick up on or after 1 April 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.